Amana Range Surface Burner Plug-In Block Kit 330031 | Fix.com

Surface Burner Plug-In Block Kit

&SeePartX&
340571-1-S-Whirlpool-330031            -Surface Burner Plug-In Block Kit
340571-2-S-Whirlpool-330031            -Surface Burner Plug-In Block Kit
340571-3-S-Whirlpool-330031            -Surface Burner Plug-In Block Kit
https://fixcom.azureedge.net/Schematics/Maytag/44177.gif
Click for the BBB Business Review of this Appliances - Small - Supplies & Parts in Dartmouth NS
Part Description:
This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.
This part fixes the following symptoms: Element will not heat.
This part works with the following brands:
Part number cross reference:
This part works with the following products:
Range, Cooktop, Microwave Oven Combo, Microwave.

Installation Instructions

Showing 1-10 of 10 Instructions

Elements heat sporatically

I followed the steps in the instructions which were very easy, once the electric power was turned off to the range. I replaced 2 burner plug in blocks in less than 30 minutes. I am embarrassed to say that these burners have not been functional for almost 3 years. I thought that I could not work with electric. Just make sure you have the tools on hand and read the instructions first. I am a mid-50's female, if I can do this so can anyone else!

Were these instructions helpful?

1 of 1 people found these instructions helpful
Parts Used: Surface Burner Plug-In Block Kit
Difficulty Level: Really Easy
Total Repair Time: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Doris from Skoke, IL

The wires were burnt coming out of the plug in block

Per the instructions. I soldered my wires where I made the splice vs using the twist on wire connectors. Just feel better about them not coming apart.....other than that, it was easy peasy!

Were these instructions helpful?

1 of 2 people found these instructions helpful
Parts Used: Surface Burner Plug-In Block Kit
Difficulty Level: Very Easy
Total Repair Time: 15 - 30 mins
Tools: Screw drivers
Customer: Jeanette from Brush, CO

Coils were uneven drip pans were corroded

This is a drop in stove. Turned off power at breaker. Pulled the coils and drip pans to access screws holding the top on. Lifted top and unscrewed old block kit. Replaced block kit and secured it. Screwed down the top and installed new drip pans. Reinserted coils and reset power. All good.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Drip Bowl - 6" , Drip Bowl - 8" , Surface Burner Plug-In Block Kit
Difficulty Level: Easy
Total Repair Time: 15 - 30 mins
Tools: Screw drivers
Customer: Kim from Matthews, NC

Switch and element block

Took back panel off just a few screws removed old switch replaced with new one replaced back. Lift stove top removed old block put new wire twist wire nut enclosed in package done works??

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Surface Burner Plug-In Block Kit
Difficulty Level: Really Easy
Total Repair Time: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: SUSAN from BELLEVILLE, NJ

Burner won't heat up

installation was simple just by following directions on package. Parts from this kit fit perfectly.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Surface Burner Plug-In Block Kit
Difficulty Level: Really Easy
Total Repair Time: 15 - 30 mins
Tools: Pliers, Socket set
Customer: Geraldine from Dolgeville, NY

Bad plug in socket. I purchased a new heating element and infinite control switch but will use as a backup as it was not necessary.

Turned off power at the curcuit breaker. Verified power off. Lifted cooktop out of countertop opening. Removed 10 screws holding the cooktop to the pan. Disconnected the wire at the infinite control switch. Remove small phillips screw holding the surface plug in block to the burner opening. Spliced the connectors to the new plug in block. Twisted the wires together and applied wire nut included in the kit. Placed shrink wrap sleeve over wire nut and heated with hair dryer to shrink the sleeve. Reversed the disassembly . Turn power back on and tested good.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Delta Frame Surface Unit - 8" , Infinite Control Switch , Surface Burner Plug-In Block Kit
Difficulty Level: Really Easy
Total Repair Time: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Brian from Cincinnati, OH

Burner would not heat

Followed detailed instructions; removed "heating block" (one phillips screw), cut wires leading to "heat block" (took longer to strip 3/8" wire than to complete rest of project), connected wires in kit with provided wire nuts, assembled wires to "new heat block", installed with one phillips screw and done. Made me ashamed that it took 3 months to get around to doing a 20 minute project.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Surface Burner Plug-In Block Kit
Difficulty Level: Really Easy
Total Repair Time: 15 - 30 mins
Tools: Screw drivers
Customer: Keith from Mukwonago, WI

Loose surface burner connections

Cut wires to connector blocks, remove old plug block with Phillips screwdriver, assemble new block with correct bracket and screw bracket to stove top, strip ends of cut wires to same length as stripped wire of new block, slide shrink tube over wires, wire nut wires together. slide shrink tube over wire and heat with a lighter till shrunk over wire nut. Done.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Surface Burner Plug-In Block Kit
Difficulty Level: Really Easy
Total Repair Time: 15 - 30 mins
Tools: Screw drivers
Customer: Edward from Chicopee, MA

Wires burnt and broken between connector.

Replaced both connections and wires from new Surface Burner Plug-In Block Kit. Took me a little while, have never done this before. Instructions were good, items perfect fit! Would order from again!

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Surface Burner Plug-In Block Kit
Difficulty Level: A Bit Difficult
Total Repair Time: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Louis from Saint Maries, ID

Right front burner didn't work. I could either have high or off. Anything in between was off.

This was the second time I replaced the plug-in block. Turned off the circuit breaker. Took out the burner and pan. Opened the top of the range, disconnected the wire nuts. Unscrewed the block unit at the edge of the burner opening. The new block kit did not have the terminals assembled, so I looked to see how the old one looked and inserted the terminals into the back of the block until they snapped in. Put the heat-shrink sleeves on the terminal wires, then connected the wires from the range to the terminals with wire nuts. Pulled the sleeves over the wire nuts and heated with a lighter until they shrunk. Did not shrink as well as last time, but it looked to be good enough. Reattached the block onto the stove top, put in the pan and inserted the terminals from the burner into the block. Turned the electricity back on, and it works.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Surface Burner Plug-In Block Kit
Difficulty Level: Easy
Total Repair Time: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Dana from Pembroke, MA
Showing 1-10 of 10 Instructions

Model Cross Reference List

This part works with the following models:

Fix Number: FIX340571
Manufacturer Part Number: 330031


Brand Model Number Description
Admiral1058AH-WRange - Electric
Admiral1058AH-ZRange - Electric
Admiral1058WH-WRange - Electric
Admiral1068F-CZRange - Slide-in, Electric
Hoover1151AJ-30Cooktop
Admiral1151AL-30Cooktop
Hoover1151WJ-30Cooktop
Admiral1151WL-30Cooktop
Roper1346*0ARange - GAS RANGE
Whirlpool1346^0ARange
Roper1346W0ARange - Freestanding, Gas
Roper1347*0ARange - GAS RANGE
Whirlpool1347^0ARange
Roper1347W0ARange - Freestanding, Gas
Roper1355*0ARange - GAS RANGE
Roper1355*1ARange - GAS RANGE
Roper1355*2ARange - GAS RANGE
Roper1355*3ARange - Range (gas)*
Whirlpool1355^0ARange
Whirlpool1355^1ARange
Whirlpool1355^2ARange
Whirlpool1355^3ARange
Roper1355W0ARange - Freestanding, Gas
Roper1355W1ARange - Freestanding, Gas
Roper1355W2ARange - Freestanding, Gas
Roper1355W3ARange - Gas
Roper1395*0ARange - GAS RANGE
Roper1395*1ARange - GAS RANGE
Roper1395*2ARange - GAS RANGE
Roper1395*3ARange - GAS RANGE