Range Hood Light Switch W11206737

Hi Marsha, thank you for your inquiry. Follow these basic steps to replace the fan switch: Disconnect the electrical power, pull the latch tabs to release the air filters, then remove both filters from the range hood. Remove the screws that secure the bottom panel to the range hood frame and pull the bottom panel out of the range hood. Disconnect the wires from the fan switch. Squeeze the locking tabs together on the fan switch and push the fan switch out of the front of the control panel. Push the new fan switch into the opening in the control panel and snap the new fan switch into place. Reconnect the wires to the new fan switch. Slide the bottom panel into place. Secure the bottom panel with the mounting screws. Reinstall the air filters. Reset the house circuit breaker to restore electrical power to the range hood. We hope this helps, good luck with this repair.