Makita Laminate Trimmer Parts

Fix Number

FIX10156657

Manufacturer Part Number

CB408

This part includes two carbon brushes with wire leads and brush springs. Worn brushes are typically presented as a failed or underperforming motor. Carbon brushes are a part that commonly wears, so it is a good idea to have these on hand. They are essential for a properly running motor because they conduct electricity to the armature. For this repair, you will start by removing the first brush from the motor, using a screwdriver to remove the brush cap. Once the cap is removed, the brush can be removed. Align the new brush with the holder and then reinstall the cap. Repeat these same steps for the other brush.

Fix Number

FIX10153834

Manufacturer Part Number

664064-4

This is a power cord, and it is used with several power tools. It is made of a thick rubber that is tough, and insulated for a long life. It has two 18 gauge wires, and is 8 feet long. When removing your old cord, take note of the wire leads placements, and how they connect to the receptacle in the tool. You will have to attach the new cord similarly.

Fix Number

FIX10156669

Manufacturer Part Number

CB75

If your motor is running poorly, running intermittently, it is likely in need of new carbon brushes. This part includes a set of two carbon brushes with wire leads and brush springs attached. Changing the carbon brushes is part of your regular maintenance, so it is a good idea to have a few extra on hand. When replacing the carbon brushes, it is also advised to inspect the armature at the same time.

Fix Number

FIX10153839

Manufacturer Part Number

664213-3

Fix Number

FIX10153918

Manufacturer Part Number

682502-4

This is a cord guard, also known as a strain reliever, for your power tools. Power tool cords go through a lot of stress during usage, and this part is designed to remove some of that stress from the weakest point, which is where the cord meets the tool. Depending on how often you use your power tool, your cord guard will deteriorate. When this happens, you should replace it immediately. Keeping a strong power cord guard will help your tool live a longer life.

Fix Number

FIX10144880

Manufacturer Part Number

259039-2

Fix Number

FIX10141535

Manufacturer Part Number

211066-7

Fix Number

FIX10150626

Manufacturer Part Number

418067-8

Fix Number

FIX10154008

Manufacturer Part Number

688117-5

Fix Number

FIX10141477

Manufacturer Part Number

210025-8