Part Location Diagram of SKN06100AV Campbell Hausfeld Pusher Assembly
See part 70 in the diagram
( Grid squares measure 1x1 inch )

Pusher Assembly SKN06100AV

Works With Model NS219500!
★★★★★
★★★★★
1 Review

Rated by 1 customers 

?

A Bit Difficult 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$45.18
In Stock
Fix Number:
FIX10243457
Manufacturer #:
SKN06100AV
Manufactured by:
Campbell Hausfeld
Works With Model NS219500!

Product Description

This authentic OEM part has been sourced directly from Campbell Hausfeld. If your nail gun is skipping or misfiring, or is your nail gun cycles but no nails are coming out, then you might have a problem with the pusher assembly. This assembly is what pushes the nails along the magazine until they are fired. This pusher assembly kit includes everything you will need to properly install a new pusher mechanism into your nail gun.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.4 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
kelly from ROSEBURG, OR
Parts Used:
SKN06100AV
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
The spring of the pusher assembly split lengthwise and curled up interfering with the nail feeding process.
1. I removed the magazine from the gun (3 allen-head machine screws at the front of the magazine, and 1 on the bottom).
2. The machine screw that mounts the pusher assembly requires a slender phillips with a 5/16" socket to hold the nut. I let the pusher be as far forward as it could be while still having access to the screw. The spr ing wants to roll up when you remove it, so remove the nut from the screw then tip the screw out of the hole keeping the screwdriver engaged in the screw head. Pay attention to the positions of the washers (I believe one goes on either side of the spring itself, and one under the nut).
3. Once the screw is out of the hole, relax the pusher against the screwdriver and slide the whole assembly forward out of the magazine.
4. Assembly is just the reverse of disassembly. I found it helpful to have my son operate the screwdriver while I controlled the pusher with one hand and held the magazine with the other. We put the screw onto the screwdriver and then fed it through the spring and into the mount hole (having placed the washers on it in the original sequence). Then my son simply held it in place while putting the washer and nut back onto it.
5. Finish by remounting the magazine onto the gun with the original hardware.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX10243457
Manufacturer Part Number: SKN06100AV
Brand
Model Number
Description
Campbell Hausfeld
IFN21950AV
Nailer - Iron Force Framing Nailer
Campbell Hausfeld
NS219001
Nailer - Framing Nailer
Campbell Hausfeld
NS219002
Nailer - Framing Nailer
Campbell Hausfeld
NS219500
Nailer - Framing Nailer