This is a genuine Bostitch replacement part that fits all BT brad nailers and all S32 staplers. If trigger leaks air or if tool misfires often, try replacing trigger valve. This kit contains one (1) each of: valve assembly (including both O-rings), lubricant, spring pin punch, and repair instructions. Please note that two (2) O-rings are included but can also be purchased separately as parts # 106967 and # 86459. O-rings are easily damaged and worn out, causing tool issues, so it\\\'s a good idea to have a backup or two on hand. Only a hammer is needed for this repair.
Works with the following brands:
Bostitch, DeWALT, Porter Cable
Works with the following products:
Nailer
Part# TVA6 replaces these:
PTVA6, TVA6
Works with the following brands:
Bostitch, DeWALT, Porter Cable
Works with the following products
Nailer
Part Number Cross Reference
Part# TVA6 replaces these:
PTVA6, TVA6
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
February 23, 2022
What trigger valve kit fits my Bostitch N28WW 28 degree framing nailer?
For model number Bostitch N28WW
Hello Patrick, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX10251035. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jo
October 20, 2021
The nailer did not shoot nail except the noise.
For model number F21PL
Hello Jo, Thank you for your inquiry. We would recommend checking the piston drive kit, the o-rings, and make sure the nail gun is properly lubricated. Good luck with your repair.
This is a genuine head valve for nailers and staplers. The head valve is responsible for controlling the flow of air to the cylinder. When the trigger is pulled, it creates an imbalance of pressure, which opens the head ...
This is a manufacturer-approved replacement head valve and is sold independently. It controls the amount of air that enters the cylinder when the trigger is initiated. This action creates an imbalance in pressure between...
This is an OEM replacement O-ring for a nailer, sold individually. This O-ring is what seals the cylinder to the housing of the gun and creates separation between the upper and lower air chambers. Due to its rubber mater...
If air is leaking from your nail gun exhaust, you may be in need of a new piston head valve. The head valve is what regulates the air flow into the cylinder. This OEM head valve is sold individually. Over time, the seals...
This is a genuine replacement seal ring supplied directly from original equipment manufacturer. It is a commonly used item on Bostitch nailers. This plastic part fits over the piston to provide an air tight seal. Over ti...
This is an individually sold cylinder seal for a nailer. As the name describes, it is placed on the cylinder of the nailer. It prevents air from leaking from inside the tool. Like all seals, it can become fragile, stretc...
This is a Genuine Manufacturer Sourced replacement part used on some Bostitch Pneumatic/Coil Fed Nailers. This part is made out of rubber and it is Sold Individually. This part provides tight seal on the Nose of the Nail...
This OEM part is used in assorted nailers and other tools manufactured by Bostitch. An O-ring is a flexible piece which seals and protects between rigid parts in order to maintain correct pressure. Many machines use more...
This Genuine OEM rebuild kit is designed for Bostitch Pneumatic Nailers. It fixes common problems associated with worn out seals including misfires, air leaks and sluggish performance. This performance kit contains all t...
This replacement piston bumper is an authentic OEM item, not an aftermarket equivalent. This item is specially designed for Bostitch nailers. This part acts as a cushion when the piston retracts back into the cylinder af...
This is a genuine OEM replacement part used in Bostitch nailers. An O-ring is a flexible circle used to create a tight seal between rigid parts in order to retain pressure. Correct fit is essential for these parts to fun...
This piston stop bumper is a genuine Bostitch replacement part that has been sourced to be used with pneumatic staplers and nailers. The bumper fits between the piston head valve and the end cap. This item is used to cat...
This is a genuine manufacturer sourced replacement part. It is commonly utilized on Bostitch nailers. The piston bumper will keep the piston from hitting the bottom of the cylinder and damaging it. Because this item is c...
This is a Genuine OEM replacement part used on some Bostitch Nailers. This part is made out of Plastic and it is Sold Individually. A utility hook can be used as a belt or rafter hook to make tool accessible.
This is an authentic manufacturer approved replacement part designed for use with nailers. It helps to provide an air tight seal for the piston. It is made out of rubber material and it is sold individually. To complete ...
This is a genuine manufacturer sourced replacement part designed for use with Bostitch staplers. The purpose of this piston bumper is to keep the piston from hitting the bottom of the cylinder and damaging it. Because th...
This genuine OEM part is found in various models of staplers/nailers manufactured by Bostitch, Porter Cable, and DeWALT. An O-ring is a bendable part used between solid pieces, creating a seal which can maintain and with...
This Genuine OEM rebuild kit is designed for Bostitch Nailers. It fixes common problems associated with worn out seals including misfires, air leaks and sluggish performance. This performance kit contains all the necessa...
The deflector seal fits between the compression spring and the deflector unit. It is an authentic OEM sourced item which is specially produced for use with Bostitch nailers. This part is made of plastic and is sold indiv...
This item is an authentic OEM sourced part that is intended to be used with pneumatic nailers from Bostitch. The gasket is used to seal the connection between the deflector assembly and the frame of the nailer. A hex dri...
This item is an authentic rebuild kit that has been sourced from the original manufacturer to be used with Bostitch nailers. Over time components may wear out causing air leaks and intermittent performance. This kit incl...
This item has been sourced from the original manufacturer to be used with pneumatic nailers from Bostitch. The head valve seal is used to prevent air from leaking between the cylinder and the head valve. This item is ava...
This seal is a genuine Bostitch replacement part that is specially produced for Senco nailers. It is used to provide an air-tight seal between the frame cap and the frame. Over time seals tend to shrink, become brittle a...
This replacement o-ring is an authentic manufacturer-sourced item, it is specially produced for use with Bostitch nailers. It is utilized to create an air tight seal between the end cap and the main frame. Over time the ...
The cylinder seal fits between the o-ring and the cylinder sleeve and is sold individually. If this part breaks it will need to be replaced because it can cause air leaks. You may need an allen wrench when replacing this...
This replacement end cap is specially designed for use with Bostitch nailers. It is supplied directly from original equipment manufacturer and it is sold individually. This end cap is helps to provide a seal for the air ...
This compression spring is an OEM direct from Bostitch. The metal spring is compatible with many stapler and nailer tools. This item is fitted within the trigger valve kit of the device. The spring is the mechanism for t...
This genuine manufacturer sourced replacement piston stop is specially produced for Porter Cable nailers. This part acts as a cushion when the driver retracts back into the cylinder after being fired. Because this part g...
The check seal fits between the o-ring and the cylinder sleeve ring. This is a genuine replacement part sourced from the original manufacturer for use with Bostitch nailers and is available as an individual replacement. ...
This is a manufacturer sourced replacement part that is specially made for use with Bostitch nailers. The purpose of this ring is to provide an air tight seal for the bumper. Please note this durable metal ring is sold i...
This replacement o-ring is an authentic manufacturer sourced replacement part that is utilized with Bostitch nailers. It helps to provide an air tight seal between the piston and the cylinder walls. It is made from high ...
This is a genuine Bostitch replacement part that has been OEM sourced to ensure quality. The seal is intended to be used with pneumatic staplers and finishing nailers. The seal is used to form an air-tight seal between t...
This is sold as a kit that Includes all of the o-rings. The o-rings attach to various other parts and are made of rubber. They are original parts from Bostitch for use in nailers. An allen wrench may be needed during the...
This is an authentic OEM part used in various Bostitch nailers. An O-ring is a flexible piece used to create a seal between parts and retain pressure. Many tools use multiple sizes of O-ring in different spots, so refer ...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
This is a Genuine Manufacturer Sourced replacement part used on some Bostitch Pneumatic/Coil Fed Nailers. This part is made out of rubber and it is Sold Individually. This part provides tight seal on the Nose of the Nail...
This OEM part is used in assorted nailers and other tools manufactured by Bostitch. An O-ring is a flexible piece which seals and protects between rigid parts in order to maintain correct pressure. Many machines use more...
This Genuine OEM rebuild kit is designed for Bostitch Pneumatic Nailers. It fixes common problems associated with worn out seals including misfires, air leaks and sluggish performance. This performance kit contains all t...
This replacement piston bumper is an authentic OEM item, not an aftermarket equivalent. This item is specially designed for Bostitch nailers. This part acts as a cushion when the piston retracts back into the cylinder af...
This is a genuine OEM replacement part used in Bostitch nailers. An O-ring is a flexible circle used to create a tight seal between rigid parts in order to retain pressure. Correct fit is essential for these parts to fun...
This piston stop bumper is a genuine Bostitch replacement part that has been sourced to be used with pneumatic staplers and nailers. The bumper fits between the piston head valve and the end cap. This item is used to cat...
This is a genuine manufacturer sourced replacement part. It is commonly utilized on Bostitch nailers. The piston bumper will keep the piston from hitting the bottom of the cylinder and damaging it. Because this item is c...
This is a Genuine OEM replacement part used on some Bostitch Nailers. This part is made out of Plastic and it is Sold Individually. A utility hook can be used as a belt or rafter hook to make tool accessible.
This is an authentic manufacturer approved replacement part designed for use with nailers. It helps to provide an air tight seal for the piston. It is made out of rubber material and it is sold individually. To complete ...
This is a genuine manufacturer sourced replacement part designed for use with Bostitch staplers. The purpose of this piston bumper is to keep the piston from hitting the bottom of the cylinder and damaging it. Because th...
This genuine OEM part is found in various models of staplers/nailers manufactured by Bostitch, Porter Cable, and DeWALT. An O-ring is a bendable part used between solid pieces, creating a seal which can maintain and with...
This Genuine OEM rebuild kit is designed for Bostitch Nailers. It fixes common problems associated with worn out seals including misfires, air leaks and sluggish performance. This performance kit contains all the necessa...
The deflector seal fits between the compression spring and the deflector unit. It is an authentic OEM sourced item which is specially produced for use with Bostitch nailers. This part is made of plastic and is sold indiv...
This item is an authentic OEM sourced part that is intended to be used with pneumatic nailers from Bostitch. The gasket is used to seal the connection between the deflector assembly and the frame of the nailer. A hex dri...
This item is an authentic rebuild kit that has been sourced from the original manufacturer to be used with Bostitch nailers. Over time components may wear out causing air leaks and intermittent performance. This kit incl...
This item has been sourced from the original manufacturer to be used with pneumatic nailers from Bostitch. The head valve seal is used to prevent air from leaking between the cylinder and the head valve. This item is ava...
This seal is a genuine Bostitch replacement part that is specially produced for Senco nailers. It is used to provide an air-tight seal between the frame cap and the frame. Over time seals tend to shrink, become brittle a...
This replacement o-ring is an authentic manufacturer-sourced item, it is specially produced for use with Bostitch nailers. It is utilized to create an air tight seal between the end cap and the main frame. Over time the ...
The cylinder seal fits between the o-ring and the cylinder sleeve and is sold individually. If this part breaks it will need to be replaced because it can cause air leaks. You may need an allen wrench when replacing this...
This replacement end cap is specially designed for use with Bostitch nailers. It is supplied directly from original equipment manufacturer and it is sold individually. This end cap is helps to provide a seal for the air ...
This compression spring is an OEM direct from Bostitch. The metal spring is compatible with many stapler and nailer tools. This item is fitted within the trigger valve kit of the device. The spring is the mechanism for t...
This genuine manufacturer sourced replacement piston stop is specially produced for Porter Cable nailers. This part acts as a cushion when the driver retracts back into the cylinder after being fired. Because this part g...
The check seal fits between the o-ring and the cylinder sleeve ring. This is a genuine replacement part sourced from the original manufacturer for use with Bostitch nailers and is available as an individual replacement. ...
This is a manufacturer sourced replacement part that is specially made for use with Bostitch nailers. The purpose of this ring is to provide an air tight seal for the bumper. Please note this durable metal ring is sold i...
This replacement o-ring is an authentic manufacturer sourced replacement part that is utilized with Bostitch nailers. It helps to provide an air tight seal between the piston and the cylinder walls. It is made from high ...
This is a genuine Bostitch replacement part that has been OEM sourced to ensure quality. The seal is intended to be used with pneumatic staplers and finishing nailers. The seal is used to form an air-tight seal between t...
This is sold as a kit that Includes all of the o-rings. The o-rings attach to various other parts and are made of rubber. They are original parts from Bostitch for use in nailers. An allen wrench may be needed during the...
This is an authentic OEM part used in various Bostitch nailers. An O-ring is a flexible piece used to create a seal between parts and retain pressure. Many tools use multiple sizes of O-ring in different spots, so refer ...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
View Less
Model Compatibility
This part works with the following models:
Fix Number: FIX12531525
Manufacturer Part Number: TVA6
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
