11746917-1-M-Whirlpool-WP9703680-Retaining Ring
Part Location Diagram of WP9703680 Whirlpool Retaining Ring
See part 7 in the diagram
( Grid squares measure 1x1 inch )
11746917-1-S-Whirlpool-WP9703680-Retaining Ring 11746917-2-S-Whirlpool-WP9703680-Retaining Ring Part Location Diagram of WP9703680 Whirlpool Retaining Ring

Retaining Ring

Rated by 7 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$8.99
In Stock
Fix Number:
FIX11746917
Manufacturer #:
WP9703680
Manufactured by:
Whirlpool
Product Description
Used on Stand Mixers.
Works with the following brands:
KitchenAid, Whirlpool
Works with the following products
Mixer
Part Number Cross Reference
Part# WP9703680 replaces these:
AP6013690, 9703680
6 Related Parts Questions and Answers 7 Installation Instructions Model Compatibility
Product Description Questions and Answers Related Parts Installation Instructions Model Compatibility

Product Description

Used on Stand Mixers.

  • Works with the following brands:
    KitchenAid, Whirlpool
  • Works with the following products:
    Mixer
  • Part# WP9703680 replaces these:
    AP6013690, 9703680

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Retaining Pin
★★★★★
★★★★★
(1)
$9.03
In Stock
Part Number: FIX11746974
This part works in conjunction with the worm and bevel gear.
Worm Gear
$48.11
In Stock
Part Number: FIX11747012
Sold individually.
Transmission Gasket
★★★★★
★★★★★
(1)
$12.98
In Stock
Part Number: FIX11747032
Used with stand mixers.
Worm Following Gear
★★★★★
★★★★★
(3)
$18.30
In Stock
Part Number: FIX12070620
This is a genuine OEM worm following gear for your stand-up mixer. The gear is made of metal and is attached to the planetary shaft. This is an important part of the appliance as it helps to drive the beaters for your mi...
Hub Gear
★★★★★
★★★★★
(4)
$22.09
In Stock
Part Number: FIX12348886
This hub gear is a genuine OEM replacement part for your stand mixer. This kit includes both the beveled gear and attachment and is also referred to as a worm follower gear. This gear assists with the rotation of the pla...
Stand Mixer Gear Grease
$65.05
In Stock
Part Number: FIX12583821
This Stand Mixer Gear Grease lubricates the moving parts of the stand mixer.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.3 / 5.0, 7 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
carol from whittaker, MI
Parts Used:
W11086780, WP9703680, W11192795
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
mixer skipped while turning
followed instructional video the hardest part was removing the snap ring! once that was removed it was a piece of cake!
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from Mercer, PA
Parts Used:
WP9703680, W11192795
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The Bevel Gear had stripped several teeth off
1.Remove Mixer top (4 screws) 2.remove gear case cover (4 screws) 3. Remove old retaining ring 4. Lift old bevel gear from shaft. 5. Remove retaining pin from shaft and drop shaft out bottom 6. Remove ALL old grease making sure to get all metal pieces from old bevel gear. 7. inspect all gears for damage 8. replace shaft and retai ning pin 9. Place new bevel gear onto shaft and secure with retaining ring 10 Install new grease liberally 11. replace gear cover case and secure with 4 screws 12. Replace case top and secure with 4 screws
Read less
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
lisa from SAINT HELENA, CA
Parts Used:
W11086780, WP9703680
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Stripped work gear- mixer wouldn't spin
Unplugged kitchen aide pro mixer
Used a square bit on drill to unscrew trim piece from mixer
Used same bit to remove top of mixer and again to expose the gears.
Used special pliers to remove the retaining ring.
Pulled off the top gear
Slid out a pin
Pulled off the worm gear
Replaced worm gear replaced pi n replaced top gear used pliers to replace retaining ring.
Reassembled the mixer with drill.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
chris from PHILA, PA
Parts Used:
W11086780, WP9709511, WP9709231, WP9707223, WP9703680, W11192795
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Noise and no motion
1 Open case and get to the gear assembly 2 remove snap ring and remove gear
3 remove pin and remove and replace gear
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bruce from Naperville, IL
Parts Used:
W11086780, WP9703680
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers
Gear badly worn
replaced gear
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Fremont, CA
Parts Used:
8212396, WP9709194, WP67500-55, WP9703680, WP9703438, W11192795
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Accessory input port striped. Not driving attachment.
Problem found is plastic transmission cover cracked causing too much play between gears causing them to skip and strip. New replacement cover is cast metal. Great improvement. Remove trim ring (one screw). Remove top cover (4 screws). Remove plastic transmission cover (4 screws). Remove snap rin g that holds too beveled gear. Replace gear and re install snap ring. Replace gear in transmission (other beveled gear) I also replace bronze bushings at each end of the adjacent worm gear. Re pack all gears and transmission cover with fresh grease. Reinstall all gears and transmission cover. Ensure all components are properly seated and lined up. Re instal cover and trim ring. Easy fix. Less than an hour. Works as good as new. Replacement parts fit perfectly.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Butte, MT
Parts Used:
WP9707223, WP9703680, W11192795
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Bevel gear broke
Took it apart. Saw the broken gear. Got online and ordered the parts and completed the repair as soon as the parts came.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11746917
Manufacturer Part Number: WP9703680
Brand
Model Number
Description
Whirlpool
3KSM6583TER0
Mixer
Whirlpool
3KSM6583TGU0
Mixer
Whirlpool
3KSM6583TWH0
Mixer
Whirlpool
3KSMC895TWH0
Mixer
KitchenAid
4KB25G1XBU3
Mixer
KitchenAid
4KB25G1XBU5
Mixer
KitchenAid
4KB25G1XBY5
Mixer
KitchenAid
4KB25G1XCO5
Mixer
KitchenAid
4KB25G1XER3
Mixer
KitchenAid
4KB25G1XER5
Mixer
KitchenAid
4KB25G1XGA5
Mixer
KitchenAid
4KB25G1XMC5
Mixer
KitchenAid
4KB25G1XMY5
Mixer
KitchenAid
4KB25G1XOB3
Mixer
KitchenAid
4KB25G1XOB5
Mixer
KitchenAid
4KB25G1XTG3
Mixer
KitchenAid
4KB25G1XTG5
Mixer
KitchenAid
4KB25G1XWW3
Mixer
KitchenAid
4KB25G1XWW5
Mixer
KitchenAid
4KD2661XMC3
Mixer
KitchenAid
4KG25G0XMC4
Mixer
KitchenAid
4KG25G0XWH4
Mixer
KitchenAid
4KG25G7XER4
Mixer
KitchenAid
4KG25G7XOB4
Mixer
KitchenAid
4KG25G7XSL4
Mixer
KitchenAid
4KG25G7XWH4
Mixer
KitchenAid
4KG25H3XER5
Mixer
KitchenAid
4KG25H3XOB5
Mixer
KitchenAid
4KG25H3XSL5
Mixer
KitchenAid
4KG25H3XWH5
Mixer