12348886-1-M-Whirlpool-W11192795-Hub Gear
Part Location Diagram of W11192795 Whirlpool Hub Gear
See part 8 in the diagram
12348886-1-S-Whirlpool-W11192795-Hub Gear 360 view
( Grid squares measure 1x1 inch )
12348886-1-S-Whirlpool-W11192795-Hub Gear 12348886-2-S-Whirlpool-W11192795-Hub Gear 12348886-3-S-Whirlpool-W11192795-Hub Gear 12348886-1-S-Whirlpool-W11192795-Hub Gear 360 view
Part Location Diagram of W11192795 Whirlpool Hub Gear

Hub Gear

Works With Model KP2671!
★★★★★
★★★★★
4 Reviews

Rated by 6 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$22.09
In Stock
Fix Number: FIX12348886
Manufacturer #: W11192795
Manufactured by: Whirlpool
Works With Model KP2671!
  • Product Description

    This hub gear is a genuine OEM replacement part for your stand mixer. This kit includes both the beveled gear and attachment and is also referred to as a worm follower gear. This gear assists with the rotation of the planetary assembly in the mixer. If the teeth of the gear have worn out, or nothing rotates when the mixer is turned on, you may need to replace the hub gear.

  • Works with the following brands
    KitchenAid, Whirlpool
  • Works with the following products
    Mixer
  • Fixes the following symptoms
    Touchpad does not respond
  • Part Number Cross Reference
    Part# W11192795 replaces these:
    AP6286924, 4161404, 4161405, 4169868, 9703337, 9703338, W11044501, W11175144, WP9703337, WP9703338
6 Related Parts Questions and Answers
6 Installation Instructions
4 Customer Reviews Model Compatibility
Product Description Questions and Answers Related Parts Installation Instructions Customer Reviews Model Compatibility

Product Description

This hub gear is a genuine OEM replacement part for your stand mixer. This kit includes both the beveled gear and attachment and is also referred to as a worm follower gear. This gear assists with the rotation of the planetary assembly in the mixer. If the teeth of the gear have worn out, or nothing rotates when the mixer is turned on, you may need to replace the hub gear.

  • Works with the following brands:
    KitchenAid, Whirlpool
  • Works with the following products:
    Mixer
  • Fixes the following symptoms:
    Touchpad does not respond
  • Part# W11192795 replaces these:
    AP6286924, 4161404, 4161405, 4169868, 9703337, 9703338 ... Show more , W11044501, W11175144, WP9703337, WP9703338 Show less

Questions and Answers

Be the first to ask our experts a question about this part!

Retaining Ring
$8.99
Part Number: FIX11746917
Used on Stand Mixers.
$8.99
In Stock
Retaining Pin
★★★★★
★★★★★
(1)
$9.03
Part Number: FIX11746974
This part works in conjunction with the worm and bevel gear.
$9.03
In Stock
Worm Gear
$45.16
Part Number: FIX11747012
Sold individually.
$45.16
In Stock
Transmission Gasket
★★★★★
★★★★★
(1)
$12.98
Part Number: FIX11747032
Used with stand mixers.
$12.98
In Stock
Worm Following Gear
★★★★★
★★★★★
(3)
$18.30
Part Number: FIX12070620
This is a genuine OEM worm following gear for your stand-up mixer. The gear is made of metal and is attached to the planetary shaft. This is an important part of the appliance as it helps to drive the beaters for your mi...
$18.30
In Stock
GREASE
$65.05
Part Number: FIX12583821
This grease is used for the KitchenAid stand mixers for the planetary gears.
$65.05
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 6 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    carol from whittaker, MI
  • Parts Used:
    W11086780, WP9703680, W11192795
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
mixer skipped while turning
followed instructional video the hardest part was removing the snap ring! once that was removed it was a piece of cake!
14 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The mixer would not spin.
Took the cover off of the transmission and replaced gears, pin and gasket and added new grease.
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Alan from Mercer, PA
  • Parts Used:
    WP9703680, W11192795
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
The Bevel Gear had stripped several teeth off
1.Remove Mixer top (4 screws) 2.remove gear case cover (4 screws) 3. Remove old retaining ring 4. Lift old bevel gear from shaft. 5. Remove retaining pin from shaft and drop shaft out bottom 6. Remove ALL old grease making sure to get all metal pieces from old bevel gear. 7. inspect all gears for damage 8. replace shaft and retaining pin 9. Place new bevel gear onto shaft and secure with retaining ring 10 Install new grease liberally 11. replace gear cover case and secure with 4 screws 12. Replace case top and secure with 4 screws
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise and no motion
1 Open case and get to the gear assembly 2 remove snap ring and remove gear
3 remove pin and remove and replace gear
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Accessory input port striped. Not driving attachment.
Problem found is plastic transmission cover cracked causing too much play between gears causing them to skip and strip. New replacement cover is cast metal. Great improvement. Remove trim ring (one screw). Remove top cover (4 screws). Remove plastic transmission cover (4 screws). Remove snap ring that holds too beveled gear. Replace gear and re install snap ring. Replace gear in transmission (other beveled gear) I also replace bronze bushings at each end of the adjacent worm gear. Re pack all gears and transmission cover with fresh grease. Reinstall all gears and transmission cover. Ensure all components are properly seated and lined up. Re instal cover and trim ring. Easy fix. Less than an hour. Works as good as new. Replacement parts fit perfectly.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Richard from Butte, MT
  • Parts Used:
    WP9707223, WP9703680, W11192795
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Bevel gear broke
Took it apart. Saw the broken gear. Got online and ordered the parts and completed the repair as soon as the parts came.
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
★ Customer Reviews
Average Rating: (4 Reviews)
4.8
★★★★★
★★★★★
Filter By Rating:
  • 5★
    3
  • 4★
    1
  • 3★
    0
  • 2★
    0
  • 1★
    0
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
SAM L - December 5, 2022
Verified Purchase
Mixer Fixed!
I purchased a complete set of replacement gears for my Kitchen Aid mixer using the parts guide on the site. All parts arrived promptly, packaged well, and fit correctly. Repair was simple and straightforward, I recommend paying close attention to the assembly order during disassembly to assist in the reassembly. No lube available :(, so I ordered food grade grease from the "big A". All told, I am back and running, making bread and mixing dough just like before. Much, much, cheaper than a new mixer!! Thanks you Fix.com!!
★★★★★
★★★★★
Francis V - September 24, 2020
Verified Purchase
just what i needed.
i was making a batch of dough too big for my kitchen aid and blew out these two gears- they fit and worked properly, and the service was excellent. received my parts in a few days without any problems.
★★★★★
★★★★★
Indira A - June 13, 2020
Verified Purchase
works
After removing the old grease (contaminated with metal chunks and particles) replacing the gear and using new grease, it runs like new. I assume the gears were cut well because it is just as quiet as when it was new.
★★★★★
★★★★★
Paul S - April 29, 2020
Verified Purchase
Oh Gear
Perfect replacement part, the repair was easy to do and shipping was fairly fast. I got the part number from the damaged gear and found the part online. Will use fix.com again if I need a repair part. First time satisfied customer.
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX12348886
Manufacturer Part Number: W11192795
Brand
Model Number
Description
KitchenAid
4KB25G1XBU3
Mixer
KitchenAid
4KB25G1XBU5
Mixer
KitchenAid
4KB25G1XBY5
Mixer
KitchenAid
4KB25G1XCO5
Mixer
KitchenAid
4KB25G1XER3
Mixer
KitchenAid
4KB25G1XER5
Mixer
KitchenAid
4KB25G1XGA5
Mixer
KitchenAid
4KB25G1XMC5
Mixer
KitchenAid
4KB25G1XMY5
Mixer
KitchenAid
4KB25G1XOB3
Mixer
KitchenAid
4KB25G1XOB5
Mixer
KitchenAid
4KB25G1XTG3
Mixer
KitchenAid
4KB25G1XTG5
Mixer
KitchenAid
4KB25G1XWW3
Mixer
KitchenAid
4KB25G1XWW5
Mixer
KitchenAid
4KD2661XMC3
Mixer
KitchenAid
4KG25G0XMC4
Mixer
KitchenAid
4KG25G0XWH4
Mixer
KitchenAid
4KG25G7XER4
Mixer
KitchenAid
4KG25G7XOB4
Mixer
KitchenAid
4KG25G7XSL4
Mixer
KitchenAid
4KG25G7XWH4
Mixer
KitchenAid
4KG25H3XER5
Mixer
KitchenAid
4KG25H3XOB5
Mixer
KitchenAid
4KG25H3XSL5
Mixer
KitchenAid
4KG25H3XWH5
Mixer
KitchenAid
4KN15C1XER1
Mixer
KitchenAid
4KN15C1XMC1
Mixer
KitchenAid
4KN15C1XOB1
Mixer
KitchenAid
4KN15C1XWH1
Mixer