KitchenAid Mixer Speed Control Plate WPW10119326 |

Speed Control Plate

11748567-1-S-Whirlpool-WPW10119326-Speed Control Plate
11748567-2-S-Whirlpool-WPW10119326-Speed Control Plate
11748567-3-S-Whirlpool-WPW10119326-Speed Control Plate
Click for the BBB Business Review of this Appliances - Small - Supplies & Parts in Dartmouth NS
Part Description:
Used in Mixers.
This part works with the following brands:
Part number cross reference:
This part works with the following products:

Installation Instructions

Showing 1-2 of 2 Instructions

Powers on monentarily at lowest speed. No other speeds work.

Primary problem was a bad speed control plate (SCP). I removed the rear cap exposing the speed control plate and pressed the adjustment screw while I changed speeds. It started working but saw sparking on the SCP contacts. Decided to first change out the worm gear & grease. 3 oz container of grease is avialable from Amazon. Don't buy the 1# pkg. You'll end up tossing most of it out. Contrary to other posts you must use food-safe grease, in case a leak develops, which was the case here. New control plate arrived damaged but the site replaced it promptly. Plate is labeled with wire colors but hard to read in dim light. Suggest drawing a diagram of the wire colors & placement before disconnecting. Also spent extra time adjusting the 3 screws on the plate so the mixer operated smoothly at all speeds. Rubber foot was much smaller & taller than the others and caused the mixer to rock slightly. Trimmed off the top and it worked fine.

Were these instructions helpful?

1 of 1 people found these instructions helpful
Parts Used: Speed Control Plate , Worm Gear , Foot
Difficulty Level: A Bit Difficult
Total Repair Time: 1- 2 hours
Tools: Screw drivers
Customer: James from Shelby Twp, MI

Speed control went bad( either off or fast)

ordered the speed control board from this site and put it in the hardest part was getting the top of the blender off since it was never removed before. also beware there is a thin spring attached to the bottom of the board if not careful you could loose it and then you have to take more of the blender apart.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Speed Control Plate
Difficulty Level: A Bit Difficult
Total Repair Time: 1- 2 hours
Tools: Nutdriver, Screw drivers
Customer: scott from stuart, VA
Showing 1-2 of 2 Instructions

Model Cross Reference List

This part works with the following models:

Fix Number: FIX11748567
Manufacturer Part Number: WPW10119326

Brand Model Number Description
KitchenAid3KSM150PSTBW0Mixer - MIXER
KitchenAid3KSM150PSTCB0Mixer - MIXER
KitchenAid3KSM150PSTCL0Mixer - MIXER
KitchenAid3KSM150PSTCU0Mixer - MIXER
KitchenAid3KSM150PSTER0Mixer - MIXER
KitchenAid3KSM150PSTGA0Mixer - MIXER
KitchenAid3KSM150PSTMY0Mixer - MIXER
KitchenAid3KSM150PSTOB0Mixer - MIXER
KitchenAid3KSM150PSTTG0Mixer - MIXER
KitchenAid3KSM150PSTWH0Mixer - MIXER
KitchenAid3KSM5CBTER0Mixer - MIXER
KitchenAid3KSM5CBTWH0Mixer - MIXER
KitchenAid4KSM105GBCBU0Mixer - MIXER
KitchenAid4KSM105GBCER0Mixer - MIXER