OEM KitchenAid Mixer Speed Control Plate [WPW10119326] | Ships Today | Fix.com
Speed Control Plate – Part Number: WPW10119326
( Grid squares measure 1x1 inch )
Speed Control Plate – Part Number: WPW10119326 Speed Control Plate – Part Number: WPW10119326 https://fixcom.azureedge.net/Schematics/Whirlpool/4RJMBESC.gif

Speed Control Plate

Your Price
$15.80

Fix Number: FIX11748567

Manufacturer #: WPW10119326

Manufactured by: Whirlpool

Part description

Used in Mixers.

Works with the following brands

KitchenAid, Whirlpool

Works with the following products

Mixer

Installation InstructionsProvided by FIX customers like you

Average Repair Rating: 2.3 / 5.0, 2 reviews ?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
scott from stuart, VA
Parts Used:
WPW10119326
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
speed control went bad( either off or fast)
ordered the speed control board from this site and put it in the hardest part was getting the top of the blender off since it was never removed before. also beware there is a thin spring attached to the bottom of the board if not careful you could loose it and then you have to take more of the blender apart.
4 of 4 people found this instruction helpful.
Were these instructions helpful?
Customer:
James from Shelby Twp, MI
Parts Used:
WPW10119326, WPW10112253, WP9709707
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Powers on monentarily at lowest speed. No other speeds work.
Primary problem was a bad speed control plate (SCP). I removed the rear cap exposing the speed control plate and pressed the adjustment screw while I changed speeds. It started working but saw sparking on the SCP contacts. Decided to first change out the worm gear & grease. 3 oz container of grease is avialable from Amazon. Don't buy the 1# pkg. You'll end up tossing most of it out. Contrary to other posts you must use food-safe grease, in case a leak develops, which was the case here. New control plate arrived damaged but the site replaced it promptly. Plate is labeled with wire colors but hard to read in dim light. Suggest drawing a diagram of the wire colors & placement before disconnecting. Also spent extra time adjusting the 3 screws on the plate so the mixer operated smoothly at all speeds. Rubber foot was much smaller & taller than the others and caused the mixer to rock slightly. Trimmed off the top and it worked fine.
2 of 2 people found this instruction helpful.
Were these instructions helpful?

Model Cross Reference

This part works with the following models:

Fix Number: FIX11748567
Manufacturer Part Number: WPW10119326
Brand
Model Number
Description
KitchenAid
3K45SS
Mixer
KitchenAid
3K5SS
Mixer
Whirlpool
3KSM150PSTAQ0
Mixer
KitchenAid
3KSM150PSTBW0
Mixer - MIXER
KitchenAid
3KSM150PSTCB0
Mixer - MIXER
KitchenAid
3KSM150PSTCL0
Mixer - MIXER
KitchenAid
3KSM150PSTCU0
Mixer - MIXER
Whirlpool
3KSM150PSTDR0
Mixer
KitchenAid
3KSM150PSTER0
Mixer - MIXER
KitchenAid
3KSM150PSTGA0
Mixer - MIXER
Whirlpool
3KSM150PSTIC0
Whirlpool
3KSM150PSTLR0
Mixer
KitchenAid
3KSM150PSTMY0
Mixer - MIXER
KitchenAid
3KSM150PSTOB0
Mixer - MIXER
Whirlpool
3KSM150PSTPK0
KitchenAid
3KSM150PSTTG0
Mixer - MIXER
KitchenAid
3KSM150PSTWH0
Mixer - MIXER
Whirlpool
3KSM150PSTWM0
Mixer
KitchenAid
3KSM5CBTER0
Mixer - MIXER
KitchenAid
3KSM5CBTWH0
Mixer - MIXER
Whirlpool
3KSM95TCZ0
Mixer
Whirlpool
3KSM95TWH0
KitchenAid
4K45SS
Mixer
KitchenAid
4K45SS7OB0
Mixer
KitchenAid
4K45SS7WH0
Mixer
KitchenAid
4K45SSDWH-1
Mixer
KitchenAid
4K45SSWH-1
Mixer
KitchenAid
4K5SS
Mixer
KitchenAid
4K5SSOB0
Mixer
KitchenAid
4K5SSWH1
Mixer