11747016-1-M-Whirlpool-WP9709276-Speed Control Lever
Part Location Diagram of WP9709276 Whirlpool Speed Control Lever
See part 3 in the diagram
( Grid squares measure 1x1 inch )
11747016-1-S-Whirlpool-WP9709276-Speed Control Lever 11747016-2-S-Whirlpool-WP9709276-Speed Control Lever 11747016-3-S-Whirlpool-WP9709276-Speed Control Lever Part Location Diagram of WP9709276 Whirlpool Speed Control Lever

Speed Control Lever

★★★★★
★★★★★
2 Reviews

Rated by 5 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$10.15
In Stock
Fix Number: FIX11747016
Manufacturer #: WP9709276
Manufactured by: Whirlpool
  • Product Description

    The speed control lever on your stand mixer allows you to adjust the speed that the mixer is running at. The lever is approximately 3.5 inches long, with a black plastic handle at the top. The speed control lever connects to the interior of your stand mixer, so you will have to take it apart to access the bar that the lever is attached to. Once you’ve opened the mixer, you can unscrew the old lever, taking care not to misplace the screw or washer that holds it in place. Replace the old lever with the new one, and then put the mixer back together.

  • Works with the following brands
    KitchenAid, Whirlpool
  • Works with the following products
    Mixer
  • Part Number Cross Reference
    Part# WP9709276 replaces these:
    AP6013789, 3184193, 9709276
Questions and Answers
5 Installation Instructions
2 Customer Reviews Model Compatibility
Product Description Questions and Answers Installation Instructions Customer Reviews Model Compatibility

Product Description

The speed control lever on your stand mixer allows you to adjust the speed that the mixer is running at. The lever is approximately 3.5 inches long, with a black plastic handle at the top. The speed control lever connects to the interior of your stand mixer, so you will have to take it apart to access the bar that the lever is attached to. Once you’ve opened the mixer, you can unscrew the old lever, taking care not to misplace the screw or washer that holds it in place. Replace the old lever with the new one, and then put the mixer back together.

  • Works with the following brands:
    KitchenAid, Whirlpool
  • Works with the following products:
    Mixer
  • Part# WP9709276 replaces these:
    AP6013789, 3184193, 9709276

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.2 / 5.0, 5 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Paul from Manchester, MD
  • Parts Used:
    WP9709276
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
The plastic knob on the speed control broke
I purchased a new part. I put a cup of hot water in the micro wave and made it extremely hot. I put the speed control with knob first into hot water. I took 2 pair of pliers holding the metal with one pair and the plastic knob with the other. I moved the knob back and forth loosing it up. I removed and while it was still hot(Knob) and installed it on the metal handle on the mixer and allowed it to cool down. It affixed itself to the metal as it cooled down.
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Josef from Mercer Island, WA
  • Parts Used:
    WP9709276
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench (Adjustable)
I needed only plastic knob but had to buy complete lever
To avoid taking the mixer unit apart to replace the lever I had to wiggle the knob off the spare lever and glue it on the old lever on the machine.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Gary from EUGENE, OR
  • Parts Used:
    WP9709276
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
Motor shell halves had rusted alignment pins inside case.
Followed YouTube video until removing motor housing from the base and separating motor shell halves. Rust due to 20 plus years age, required a small hammer or plastic or wood mallet and a cold chisel and two sizes of flat blade screwdrivers to pry and tap encouragingly until separation. I removed old black grease and redistributed excess grease onto gears before reassembly. The speed control arm was the easiest part to install once the motor housing was open. Perhaps a better part would be to have the lever as it exists, but offer a snap-on plastic knob/handle that does not require disassembly of entire mixer.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Sheila from New York, NY
  • Parts Used:
    WP9709276
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
The plastic knob on the speed lever had broken off the metal handle
Cleaned old lever. Held new lever over a stove burner with a pliers and when the plastic of the knob softened, pulled it off and pushed it on the new handle. Done. Two minutes total.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Rose from Oakhurst, TX
  • Parts Used:
    WP9709276, WP9709194
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
speed control knob, Thumb screw
Husband pull knob from part sent used plumbers tape to make it stay on. the thumb screw he took old one off and put new on.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
★ Customer Reviews
Average Rating: (2 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5★
    2
  • 4★
    0
  • 3★
    0
  • 2★
    0
  • 1★
    0
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jon M R - September 10, 2021
Verified Purchase
Speed control level
Okay
★★★★★
★★★★★
Gary L - January 3, 2020
Verified Purchase
Part arrived in perfect condition
Stamped metal lever with pin and screw holes placed accurately. Installation was a bear due to rusted pins holding motor shell halves in position. Those rusted pins cannot be accessed until the shell is open. I greased rusted parts before reassembly...
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX11747016
Manufacturer Part Number: WP9709276
Brand
Model Number
Description
KitchenAid
3K45SS
Mixer
KitchenAid
3K5SS
Mixer
Whirlpool
3KSM150PSTAQ0
Mixer
Whirlpool
3KSM150PSTBM0
Mixer - Stand Mixer
KitchenAid
3KSM150PSTBW0
Mixer - MIXER
KitchenAid
3KSM150PSTCB0
Mixer - MIXER
KitchenAid
3KSM150PSTCL0
Mixer - MIXER
KitchenAid
3KSM150PSTCU0
Mixer - MIXER
Whirlpool
3KSM150PSTDR0
Mixer
KitchenAid
3KSM150PSTER0
Mixer - MIXER
KitchenAid
3KSM150PSTGA0
Mixer - MIXER
Whirlpool
3KSM150PSTIC0
Whirlpool
3KSM150PSTLR0
Mixer
Whirlpool
3KSM150PSTMH0
Mixer - Stand Mixer
KitchenAid
3KSM150PSTMY0
Mixer - MIXER
KitchenAid
3KSM150PSTOB0
Mixer - MIXER
Whirlpool
3KSM150PSTPA0
Mixer - Stand Mixer
Whirlpool
3KSM150PSTPK0
KitchenAid
3KSM150PSTTG0
Mixer - MIXER
Whirlpool
3KSM150PSTVB0
Mixer - Stand Mixer
KitchenAid
3KSM150PSTWH0
Mixer - MIXER
Whirlpool
3KSM150PSTWM0
Mixer
KitchenAid
3KSM5CBTER0
Mixer - MIXER
KitchenAid
3KSM5CBTWH0
Mixer - MIXER
Whirlpool
3KSM95TCZ0
Mixer
Whirlpool
3KSM95TWH0
KitchenAid
4K45SS
Mixer
KitchenAid
4K45SS7OB0
Mixer
KitchenAid
4K45SS7WH0
Mixer
KitchenAid
4K45SSDWH-1
Mixer