Whirlpool/Whirlpool_Thumb/KYQ28YFF.gif
See part 26 in the diagram
( Grid squares measure 1x1 inch )

Transmission Case Gasket

$13.17   In Stock
Fix Number: FIX11742306
Manufacturer #: WP4162324
Manufactured by: Whirlpool

Product Description

This part is used with Kitchenaid Mixers.

Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.2 / 5.0, 5 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      Melody from Silverton, CO
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers
    stripped the worm gear, fixed bushings
    I opened the mixer and determined that the worm gear had failed, as designed, to save the other gears. There was also oil separated from the grease and it needed replaced. The Transmission case gasket was damaged and must have been from the time it was built. I removed the grease with putty knife and kept I on a plastic plate until the parts came in (to determine the amount needed when I replaced it.) I used the punch to remove the two pins needed with light tap from hammer. I left the mixer in pieces on the counter until the parts arrived. I replaced the gear and all other parts and placed fresh grease in the mixer. I had to adjust the beater, too. I had removed one of the bushings by mistake. When mixer was back together it would not start. IT TOOK SOME TIME BUT I FOUND ANOTHER WEB SITE THAT EXPLAINED HOW TO REPLACE THE BUSHING. TAKE A FLASHLIGHT AND LOOK INTO THE SQUARE BRUSH HOLDER. THERE IS A DETANT IN THE HOLDER. THE SHAVED SIDE OF THE BRUSH NEEDS TO SLIP PAST THE DETENT TO BE ABLE TO TOUCH THE AMATURE. Once that was done, it worked great. Very smooth with new gear and grease.
    8 of 8 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Neil from College Place, WA
    • Parts Used:
      WP4162324
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Screw drivers
    Gear stripped due more than normal useage
    Dissembled mixer found gear had stripped. Ordered new gasket, gear and washer. Stated reassembly damaged new gasket and had to another. Started reassembly minor alignment adjustments. Put in more food grade grease. Put brushes back in no rotation of motor. Found out that bushes have go in exactly right. Plugged in and it works fine.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Michael from Kent, WA
    • Parts Used:
      WP4162324, WP240309-2
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Pliers, Screw drivers, Wrench (Adjustable)
    stripped out the worm gear
    This is a relatively easy repair. There are a number of steps to getting access to the gear and bracket but easy to figure out. Once the assembly is opened up the gear bracket is exposed and three screws removes it and reinstalls the new piece. Once it is exposed I recommend cleaning the inside of all the old grease and putting fresh in. I also recommend replacing the Transmission Case Gasket. Both can be purchased from this site. Then reassemble. Prior to putting the back housing piece on, which is the one of the last pieces take a few minutes to look on uTube for instructions on how adjust the speeds of the mixer. This is also very simple and frankly shouldn't be overlooked. Many mixers seem to loose "speeds" over time. A tune up repairs all the presets so the mixer is running at the appropriate speeds and all the speeds. Mine seemed to not have two of the speeds, and initially I thought I had lost some gears. But a tune up restored them.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Scott from Lewiston, MN
    • Parts Used:
      WP4162324
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers, Socket set, Wrench set
    Transmission case developed a leak.
    I just disassembled the mixer (I had an exploded view sheet) and cleaned the surfaces, applied the gasket with a small amount of sealer and re-assembled the unit. Repair was a complete success. Pretty much a no- brainer. Thanks for the FAST service. Scott
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Carl from Anchorage, AK
    • Parts Used:
      WPW10112253, WP4162324
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers
    Worm Gear had been stripped
    Set up my computer on the table, followed the directions on the video, pausing at each step along the way. Even though the model in the video wasn't the same as mine, it was very easy to follow.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX11742306
      Manufacturer Part Number: WP4162324
      Brand
      Model Number
      Description
      KitchenAid
      3K45SS
      Mixer
      KitchenAid
      3K5SS
      Mixer
      Whirlpool
      3KSM150PSTAQ0
      Mixer
      KitchenAid
      3KSM150PSTBW0
      Mixer - MIXER
      KitchenAid
      3KSM150PSTCB0
      Mixer - MIXER
      KitchenAid
      3KSM150PSTCL0
      Mixer - MIXER
      KitchenAid
      3KSM150PSTCU0
      Mixer - MIXER
      Whirlpool
      3KSM150PSTDR0
      Mixer
      KitchenAid
      3KSM150PSTER0
      Mixer - MIXER
      KitchenAid
      3KSM150PSTGA0
      Mixer - MIXER
      Whirlpool
      3KSM150PSTIC0
      Whirlpool
      3KSM150PSTLR0
      Mixer
      KitchenAid
      3KSM150PSTMY0
      Mixer - MIXER
      KitchenAid
      3KSM150PSTOB0
      Mixer - MIXER
      Whirlpool
      3KSM150PSTPK0
      KitchenAid
      3KSM150PSTTG0
      Mixer - MIXER
      KitchenAid
      3KSM150PSTWH0
      Mixer - MIXER
      Whirlpool
      3KSM150PSTWM0
      Mixer
      KitchenAid
      3KSM5CBTER0
      Mixer - MIXER
      KitchenAid
      3KSM5CBTWH0
      Mixer - MIXER
      Whirlpool
      3KSM95TCZ0
      Mixer
      Whirlpool
      3KSM95TWH0
      KitchenAid
      4K45SS
      Mixer
      KitchenAid
      4K45SS7OB0
      Mixer
      KitchenAid
      4K45SS7WH0
      Mixer
      KitchenAid
      4K45SSDWH-1
      Mixer
      KitchenAid
      4K45SSWH-1
      Mixer
      KitchenAid
      4K5SS
      Mixer
      KitchenAid
      4K5SSOB0
      Mixer
      KitchenAid
      4K5SSWH1
      Mixer