General Electric Microwave Halogen Light Bulb - 120V 20W WB25X10019 | Fix.com

Halogen Light Bulb - 120V 20W

&SeePartX&
2351821-1-S-GE-WB25X10019-Halogen Light Bulb - 120V 20W
2351821-2-S-GE-WB25X10019-Halogen Light Bulb - 120V 20W
https://www.fix.com/Schematics/GE/00125324i01.gif
Click for the BBB Business Review of this Appliances - Small - Supplies & Parts in Dartmouth NS
Part Description:
Sold individually.
This part works with the following brands:
Part number cross reference:
This part works with the following products:
Microwave, Microwave Oven Combo.

Installation Videos

Replacing your General Electric Microwave Halogen Light Bulb - 120V 20W
Watch this how to video with simple, step-by-step instructions for a successful DIY repair.
Fixes the following symptoms:
  • Light is not turning on
Tools used for this repair:
  • Philips screw driver

Installation Instructions

Showing 1-3 of 3 Instructions

Lights burned out

replaced

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Halogen Light Bulb - 120V 20W
Difficulty Level: Easy
Total Repair Time: Less than 15 mins
Tools: Screw drivers
Customer: Joseph from Palm Coast, FL

GE profile over the range microwave problems.

Open the door, remove the vent diffuser by removing the top two exposed screws. Remove the control panel by removing one screw now exposed from the removed diffuser, pull up on the control board to unseat, then remove the ground screw that keeps it tight to the switches so you can work more easily. The three door switches are easily accessible. Remove the two screws holding the latch bracket, pu the bracket out that's holding all the switches. Remove and replace the switches, then reassemble the microwave in reverse order.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Halogen Light Bulb - 120V 20W , Monitor Door Switch , Secondary Door Switch
Difficulty Level: Really Easy
Total Repair Time: Less than 15 mins
Tools: Screw drivers
Customer: Gregory from FLUSHING, MI

Unit has two bulbs. Both burned out.

Open the lens/bulb cover - one phillips head screw. Turn on safety light so its shining upwards. Remove each bulb - do not pull downwards - slide the bulb out almost horizontally. Since these are halogen bulbs I cleaned them off with rubbibg alcohol. I also cleaned my fingers. Leaning over the stove top (this is a stove top microwave), gently replace each bulb. You'll need to feel your way to ensure the two wire connectors slide into their sockets. Once both are done, close the lens/bulb cover and replace the fastener screw.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Halogen Light Bulb - 120V 20W
Difficulty Level: Really Easy
Total Repair Time: Less than 15 mins
Tools: Screw drivers
Customer: Walter from Northport, NY
Showing 1-3 of 3 Instructions

Model Cross Reference List

This part works with the following models:

Fix Number: FIX2351821
Manufacturer Part Number: WB25X10019


Brand Model Number Description
Kenmore36363672200Microwave
Kenmore36363672201Microwave
Kenmore36363673200Microwave
Kenmore36363674200Microwave
Kenmore36363674201Microwave
Kenmore36363679200Microwave
Kenmore36363679201Microwave
Kenmore36363692301Microwave
Kenmore36363692302Microwave
Kenmore36363693301Microwave
Kenmore36363693302Microwave
Kenmore36363694301Microwave
Kenmore36363694302Microwave
Kenmore36363699301Microwave
Kenmore36363699302Microwave
HotpointCSA1201RSS01Microwave
HotpointCSA1201RSS02Microwave
HotpointCSA1201RSS03Microwave
General ElectricCVM1790SS1SSMicrowave
General ElectricCVM1790SS2SSMicrowave
General ElectricCVM2072SM1SSMicrowave
General ElectricCVM2072SM2SSMicrowave
General ElectricCVM2072SM3SSMicrowave
General ElectricCVM2072SM4SSMicrowave
General ElectricDVM1850DM2BBMicrowave
General ElectricDVM1850DM2WWMicrowave
General ElectricDVM1850DM3BBMicrowave
General ElectricDVM1850DM3WWMicrowave
General ElectricDVM1850DM4BBMicrowave
General ElectricDVM1850DM4WWMicrowave