GE/GE_Thumb/00123223i01.gif
See part 37 in the diagram
( Grid squares measure 1x1 inch )

Glass Turntable Coupler

$16.69
Fix Number: FIX227859
Manufacturer #: WB06X10144
Manufactured by: GE

Product Description

This part accepts a D-shaped motor shaft.

Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.7 / 5.0, 7 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    David from Cincinnati, OH
  • Parts Used:
    WB26X10038, WB06X10144
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Turntable stopped working on microwave
Unplugged the microwave and removed the 5 screws holding the bottom cover in place. Since the bottom cover is hinged in the back, I let the cover hang in place. I removed the connector from the turntable motor and then removed the two screws holding the motor in place. Lifted out the glass turntable and lifted the coupler out. Reinstalled the new motor, placed the coupler onto the new motor and reinstalled the bottom cover. Biggest hassle was entering in the time and date after plugging the microwave back in!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Gary from Sioux City, IA
  • Parts Used:
    WB06X10144
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Coupler broke and would no longer turn the glass tray
Remove the broken coupler by pulling it up and out. Insert the new coupler by aligning it with the d-shaped shaft and pressing down until it clicked into place. Reinstall the glass turn table and test.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Steve from rocky mount, NC
  • Parts Used:
    WB06X10144
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
PLASTIC TURN TABLE STEM CAP BROKE
JUST PUSHED THE NEW ONE ON THE MOTOR STEM
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Alex from Alameda, CA
  • Parts Used:
    WB06X10144
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Plastic turntable coupler was broken
Pried the broken coupler out with screwdriver. Pressed the new coupler in place. Had to make sure it was seated correctly. The part arrived the day after I ordered it online. Thank you.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Linda from Sacramento, CA
  • Parts Used:
    WB06X10144
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Glass turntable Coupler crushed.
I removed the old glass turntable coupler and replaced with the new one by hands, no tool needed, very easy.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    DOUG from BRADENTON, FL
  • Parts Used:
    WB06X10144
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
The Connector That Turns The Turntable Had Broken
Although the instructions that came with the part said to take the bottom screws out, tilt and remove motor; none of this necessary. Just slipped the coupler over the driving screw and that is it. Works beautifully.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    H Kenneth from Valrico, FL
  • Parts Used:
    WB06X10144
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Glass turntable would not turn.
Unplug or turn the breaker off to the unit. On the bottom of the unit remove the three screws at the front and one on each side in the rear. Let cover down, unplug the connector on the motor then turn the motor so tabs allow the motor too drop away. Install the new coupler from inside unit an insert the motor shaft into the coupler, slide coupler lock over the tab on coupler. Replace the motor reinstall connector and bottom cover.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX227859
Manufacturer Part Number: WB06X10144
Brand
Model Number
Description
General Electric
DVM1850DM2BB
Microwave
General Electric
DVM1850DM2WW
Microwave
General Electric
DVM1850DM3BB
Microwave
General Electric
DVM1850DM3WW
Microwave
General Electric
DVM1850DM4BB
Microwave
General Electric
DVM1850DM4WW
Microwave
General Electric
DVM1850DMBB01
Microwave - Counter Top
General Electric
DVM1850DMWW01
Microwave - Counter Top
General Electric
DVM1850MM2BG
Microwave
General Electric
DVM1850MM3BG
Microwave
General Electric
DVM1850MM4BG
Microwave
General Electric
DVM1850MMBG01
Microwave - Counter Top
General Electric
DVM1850SM2SS
Microwave
General Electric
DVM1850SM3SS
Microwave
General Electric
DVM1850SM4SS
Microwave
General Electric
DVM1850SMSS01
Microwave - Counter Top
General Electric
EMO4000JBB01
Microwave - Counter Top
General Electric
EMO4000JBB02
Microwave - Counter Top
General Electric
EMO4000JBB03
Microwave - Counter Top
General Electric
EMO4000JBB04
Microwave - Counter Top
General Electric
EMO4000JBB05
Microwave - Counter Top
General Electric
EMO4000JCC01
Microwave - Counter Top
General Electric
EMO4000JCC02
Microwave - Counter Top
General Electric
EMO4000JCC03
Microwave - Counter Top
General Electric
EMO4000JCC04
Microwave - Counter Top
General Electric
EMO4000JCC05
Microwave - Counter Top
General Electric
EMO4000JSS01
Microwave - Counter Top
General Electric
EMO4000JSS02
Microwave - Counter Top
General Electric
EMO4000JSS03
Microwave - Counter Top
General Electric
EMO4000JSS04
Microwave - Counter Top