This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are approximate). In general, washers help to spread load, can provide insulation such as electrical, and can also help to prevent galvanic corrosion.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gabriele
May 22, 2023
I just replaced the mandrel on my tractor and I lost the mandrel washerI used an after marked washer and the blades don;t engage? i know has to washers, I lost the large one
For model number yth2246
Hi Gabriele, thank you for reaching out. Based on our research, the compatible mandrel washer for your model is part number FIX9286886. Let us know if you have further questions!
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
This OEM hex head bolt is for lawn tractors. It is used on mower deck mandrels for mounting the spindles to the deck. This is a self-threading screw and will need to be replaced if it is worn or missing altogether. It is...
This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually but two are needed ...
This is a manufacturer-approved high quality replacement blade for a lawn tractor and is sold individually. It is used on 46-inch decks, and measures approximately 22-1/2 inches long and 2-3/4 inches wide. This blade is ...
This genuine Craftsman hex gauge wheel is a replacement part sourced directly from the original manufacturer and is designed for use with riding lawn mowers. It attaches to the mower’s deck assembly and helps support the...
This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part of a mower wheel or...
This is a genuine Husqvarna replacement part sourced directly from original equipment manufacturer for use with lawn mowers/tractors. It is commonly used in riding mowers to keep the gauge wheel in place. This is a hex h...
This is an OEM axle cap for lawn tractors and is sold individually. It stops debris from getting into the wheel hub and axle. This axle cap is prone to wear and tear and should be replaced when it is goes missing or appe...
This is an OEM bolt and washer assembly, designed to hold the lawnmower blade to the spindle shaft. This threaded bolt has a curved rounded head and measures approximately 7/16-inches by 2-inches. If your lawnmower blade...
This authentic manufacturer-sourced mandrel pulley is designed for use with Craftsman lawn mowers. It serves as a direct replacement for a missing or damaged pulley originally installed on the unit, helping to maintain p...
This is an OEM part sourced directly from the manufacturer. The belt is designed for use in Craftsman lawn tractors and riding mowers. This part is made of flexible rubber, and is used in conjunction with the pulley asse...
This replacement idler pulley is an original part sourced directly from the equipment manufacturer and is designed for use with select Poulan and Husqvarna riding lawn mowers and garden tractors. It plays a key role in m...
This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most models require three. F...
This high-quality item is an authentic OEM hardware that is designed for use with Craftsman riding lawn mowers and garden tractors. It is one of the locknuts that is utilized to secure the pulleys. A locknut is a nut tha...
This mandrel assembly is for lawn tractors.
Mandrel assembly attaches to the mower deck and spins the blades. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included....
This is an OEM replacement part, sold individually. The High Lift Blade is also referred to as a 2 in 1 blade. It throws the clippings better, and is used when you are just discharging or bagging the grass clippings. If...
This is a 5/16-inch metal cotter pin and it is sold as an individual part. Cotter pins secure a variety of different assemblies by placing them through a drilled hole in a shaft or bolt, such as on a wheel on a lawn trac...
This is an authentically sourced OEM mandrel pulley, designed for lawn tractors (riding mowers) with a 42-inch deck. It is sold individually. This durable metal part measures approximately 5-3/16-inches in outer diameter...
It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between conne...
This Genuine OEM drive belt is a manufacturer-sourced component designed for use with select Craftsman riding lawn mowers and garden tractors. Made from high-quality, durable rubber and sold individually, this belt serve...
This is an OEM bowtie cotter pin for lawn tractors. It is sold individually. This part is made of metal material, so over time, this metal can corrode or rust, especially if the lawn tractor is exposed to elements on a r...
This genuine replacement part is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is a 3 in 1 blade which can be used to mow, mulch or discharge...
This is a single OEM replacement screw for a lawn mower. This flanged hex head screw measures 1/4-20 by 5/8. It is used in various applications, so we recommend checking the diagram related to your model for its exact lo...
This is mulching blade is specially designed for use with Craftsman riding lawn mowers/tractors. Mulching blades are shaped to keep the grass under deck for longer allowing it to be cut into smaller pieces. This provides...
Keep your mower running at its best with this genuine replacement baffle, made specifically for Craftsman riding lawn mowers and garden tractors. This high-quality plastic part fits under the mower deck and helps direct ...
This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.
This genuine manufacturer-sourced component which is made for use with Craftsman riding lawn mowers and garden tractors. The blade is specially designed for bagging the grass clippings, unfortunately, over time it may we...
This is a drive belt for a lawn tractor or lawn mower. The belt is designed to turn the pulley that spins the blades on the mower deck. If the blade is not turning correctly, it could be due to a worn belt. This OEM rubb...
This genuine OEM idler pulley is sourced directly from the original manufacturer and is designed for use with select riding lawn mowers from Husqvarna, Poulan, and Jonsered. It mounts to the top of the mower’s deck assem...
This is a mandrel assembly for a ride-on lawn mower. It is sourced right from the original manufacturer and is sold as one unit. It attaches to the deck and spins the blade. The bearings in the mandrel are susceptible to...
This drive belt 54 is a genuine manufacturer sourced replacement part. This is the main deck belt that rotates the blades on riding lawn mowers/tractors. Over time this belt will stretch and wear out, eventually breaking...
This is a genuine replacement belt sourced from the original manufacturer, designed for use with riding lawn mowers and tractors. Made from durable rubber and sold individually, this belt is responsible for driving the m...
This is a genuine replacement part sourced directly from the manufacturer. The arm brake is commonly found in Craftsman lawn tractors. This part is made of metal with an attached brake pad, and is connected to the idle...
This is a genuine OEM supplied belt which is designed for use with Husqvarna, Jonsered and Poulan riding lawn mowers and garden tractors. It is the main belt for the deck that drives the blades. Unfortunately, over time ...
This is a genuine replacement part sourced directly from the manufacturer. The engine pulley is commonly found in Craftsman lawn tractors and riding mowers. This part is made of metal, and is used in conjunction with t...
This is a genuine replacement part sourced directly from the original manufacturer. This assembly consists of metal parts and it is sold individually. This is the part that houses shaft that mower blade attaches to, it ...
Original Manufacturer Approved replacement Mandrell Shaft Assembly used on Lawn Tractors/Mowers. Includes all Metal shaft assembly, bearing, and nut. The Mandrel shaft is secured in Mandrel Housing and it goes through th...
This authentic replacement part is sourced directly from original equipment manufacturer. This blade is designed for use with riding lawn mowers/tractors. Mulching blades are designed to circulate the grass longer so it ...
This is an OEM replacement part sourced directly from the original manufacturer. This Mandrel Housing is made out of Metal and it is Sold Individually. This is the part that Houses Shaft that mower blade attaches to, it...
This belt keeper is a genuine OEM part sourced directly from Craftsman, designed for use with a wide range of lawn tractors. It plays a key role in maintaining proper belt alignment between the pulleys, ensuring smooth a...
This is a genuine replacement part manufactured for use with riding lawnmowers. The return spring can be used to return the blade break to its running position when the blade brake is disengaged. However, this spring is ...
This is an authentic OEM part for use with Craftsman Lawn Tractors. The deck washout port attaches to the deck and washes grass and debris from under the deck. It is made out of metal and it is sold individually. The too...
This is a genuine replacement part that is sourced directly from the original equipment manufacturer for use with Husqvarna, Weed Eater and Poulan riding lawn mowers and garden tractors. The Mandrel Pulley 38 is the part...
This part is the OEM part from the Husqvarna manufacturer. The mandrel deck assembly is constructed of high-quality, metal parts. This item is compatible with lawn and garden tractors, and secures the blade 16 1/4 to the...
This is a genuine replacement part manufactured for use with lawn tractors from Craftsman. This part applies pressure on the pulley to stop the blades from turning when the blades are released. It is recommended to revi...
This hardware is an authentic OEM sourced item. It is a specially manufactured for use with lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This part has ...
This genuine Craftsman shaft assembly is an original replacement part sourced directly from the manufacturer and is designed for use with riding lawn mowers. It fits into the mandrel housing and serves as a critical conn...
This genuine manufacturer sourced hardware is designed for use on Husqvarna and Poulan riding lawn mowers and tractors. This hex nut has multiple applications depending on the model. Please make sure to check appropriate...
This is a genuine replacement part that is sourced directly from the original equipment manufacturer for use with Husqvarna lawn mowers and garden tractors. It is the part that the belt attaches to and it helps to rotate...
This authentic replacement part is made for use with riding lawn mowers/tractors. Mulching blades are designed to keep the grass under the deck longer. That way it will be cut into smaller pieces, providing better mulch ...
This is a special item that provides a tight fit between connected parts. Over time it may wear out, get damaged or lost eventually requiring a replacement. Check the appropriate diagrams for your model to ensure the pro...
This is an authentic manufacturer-sourced part that is specially made for use with Poulan, Husqvarna and Weed Eater riding lawn mowers and garden tractors. The pulley is used to connect the belt and the mandrel spindle t...
This is an original part from Husqvarna, Poulan, and Jonsered for use with Lawn Tractors. The mandrel shaft assembly rotates the blade under the mower deck. The mandrel shaft assembly includes the shaft and the bearing. ...
This is a genuine manufacturer-sourced part which is specially designed for use with Craftsman Lawn Tractors and Riding Mowers. The Drive pulley attaches to the transmission and drives the transmission shaft to move the ...
This is an authentic manufacturer made replacement part which is specially designed for use with Craftsman riding lawn mowers. The pulley applies tension to the blade belt to allow the engine to start. This part is made ...
This is an OEM part sourced directly from the manufacturer. The flange nut is commonly found in lawn tractors and riding mowers from Poulan, Husqvarna, and Weed Eater. This part is made of metal, and is generally used ...
It is a genuine OEM sourced item that is specially designed for use with Husqvarna riding lawn tractors. This replacement bearing allows mandrel assembly which holds the mower blade to spin freely with minimum friction. ...
This is a genuine replacement part manufactured for use with riding lawnmowers. The shaft assembly is often called the spindle shaft, and is used to drive the cutting blades. The shaft includes the lower bearing towards ...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
This is a genuine Husqvarna replacement part sourced directly from original equipment manufacturer for use with lawn mowers/tractors. It is commonly used in riding mowers to keep the gauge wheel in place. This is a hex h...
This is an OEM axle cap for lawn tractors and is sold individually. It stops debris from getting into the wheel hub and axle. This axle cap is prone to wear and tear and should be replaced when it is goes missing or appe...
This is an OEM bolt and washer assembly, designed to hold the lawnmower blade to the spindle shaft. This threaded bolt has a curved rounded head and measures approximately 7/16-inches by 2-inches. If your lawnmower blade...
This authentic manufacturer-sourced mandrel pulley is designed for use with Craftsman lawn mowers. It serves as a direct replacement for a missing or damaged pulley originally installed on the unit, helping to maintain p...
This is an OEM part sourced directly from the manufacturer. The belt is designed for use in Craftsman lawn tractors and riding mowers. This part is made of flexible rubber, and is used in conjunction with the pulley asse...
This replacement idler pulley is an original part sourced directly from the equipment manufacturer and is designed for use with select Poulan and Husqvarna riding lawn mowers and garden tractors. It plays a key role in m...
This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most models require three. F...
This high-quality item is an authentic OEM hardware that is designed for use with Craftsman riding lawn mowers and garden tractors. It is one of the locknuts that is utilized to secure the pulleys. A locknut is a nut tha...
This mandrel assembly is for lawn tractors.
Mandrel assembly attaches to the mower deck and spins the blades. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included....
This is an OEM replacement part, sold individually. The High Lift Blade is also referred to as a 2 in 1 blade. It throws the clippings better, and is used when you are just discharging or bagging the grass clippings. If...
This is a 5/16-inch metal cotter pin and it is sold as an individual part. Cotter pins secure a variety of different assemblies by placing them through a drilled hole in a shaft or bolt, such as on a wheel on a lawn trac...
This is an authentically sourced OEM mandrel pulley, designed for lawn tractors (riding mowers) with a 42-inch deck. It is sold individually. This durable metal part measures approximately 5-3/16-inches in outer diameter...
It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between conne...
This Genuine OEM drive belt is a manufacturer-sourced component designed for use with select Craftsman riding lawn mowers and garden tractors. Made from high-quality, durable rubber and sold individually, this belt serve...
This is an OEM bowtie cotter pin for lawn tractors. It is sold individually. This part is made of metal material, so over time, this metal can corrode or rust, especially if the lawn tractor is exposed to elements on a r...
This genuine replacement part is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is a 3 in 1 blade which can be used to mow, mulch or discharge...
This is a single OEM replacement screw for a lawn mower. This flanged hex head screw measures 1/4-20 by 5/8. It is used in various applications, so we recommend checking the diagram related to your model for its exact lo...
This is mulching blade is specially designed for use with Craftsman riding lawn mowers/tractors. Mulching blades are shaped to keep the grass under deck for longer allowing it to be cut into smaller pieces. This provides...
Keep your mower running at its best with this genuine replacement baffle, made specifically for Craftsman riding lawn mowers and garden tractors. This high-quality plastic part fits under the mower deck and helps direct ...
This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.
This genuine manufacturer-sourced component which is made for use with Craftsman riding lawn mowers and garden tractors. The blade is specially designed for bagging the grass clippings, unfortunately, over time it may we...
This is a drive belt for a lawn tractor or lawn mower. The belt is designed to turn the pulley that spins the blades on the mower deck. If the blade is not turning correctly, it could be due to a worn belt. This OEM rubb...
This genuine OEM idler pulley is sourced directly from the original manufacturer and is designed for use with select riding lawn mowers from Husqvarna, Poulan, and Jonsered. It mounts to the top of the mower’s deck assem...
This is a mandrel assembly for a ride-on lawn mower. It is sourced right from the original manufacturer and is sold as one unit. It attaches to the deck and spins the blade. The bearings in the mandrel are susceptible to...
This drive belt 54 is a genuine manufacturer sourced replacement part. This is the main deck belt that rotates the blades on riding lawn mowers/tractors. Over time this belt will stretch and wear out, eventually breaking...
This is a genuine replacement belt sourced from the original manufacturer, designed for use with riding lawn mowers and tractors. Made from durable rubber and sold individually, this belt is responsible for driving the m...
This is a genuine replacement part sourced directly from the manufacturer. The arm brake is commonly found in Craftsman lawn tractors. This part is made of metal with an attached brake pad, and is connected to the idle...
This is a genuine OEM supplied belt which is designed for use with Husqvarna, Jonsered and Poulan riding lawn mowers and garden tractors. It is the main belt for the deck that drives the blades. Unfortunately, over time ...
This is a genuine replacement part sourced directly from the manufacturer. The engine pulley is commonly found in Craftsman lawn tractors and riding mowers. This part is made of metal, and is used in conjunction with t...
This is a genuine replacement part sourced directly from the original manufacturer. This assembly consists of metal parts and it is sold individually. This is the part that houses shaft that mower blade attaches to, it ...
Original Manufacturer Approved replacement Mandrell Shaft Assembly used on Lawn Tractors/Mowers. Includes all Metal shaft assembly, bearing, and nut. The Mandrel shaft is secured in Mandrel Housing and it goes through th...
This authentic replacement part is sourced directly from original equipment manufacturer. This blade is designed for use with riding lawn mowers/tractors. Mulching blades are designed to circulate the grass longer so it ...
This is an OEM replacement part sourced directly from the original manufacturer. This Mandrel Housing is made out of Metal and it is Sold Individually. This is the part that Houses Shaft that mower blade attaches to, it...
This belt keeper is a genuine OEM part sourced directly from Craftsman, designed for use with a wide range of lawn tractors. It plays a key role in maintaining proper belt alignment between the pulleys, ensuring smooth a...
This is a genuine replacement part manufactured for use with riding lawnmowers. The return spring can be used to return the blade break to its running position when the blade brake is disengaged. However, this spring is ...
This is an authentic OEM part for use with Craftsman Lawn Tractors. The deck washout port attaches to the deck and washes grass and debris from under the deck. It is made out of metal and it is sold individually. The too...
This is a genuine replacement part that is sourced directly from the original equipment manufacturer for use with Husqvarna, Weed Eater and Poulan riding lawn mowers and garden tractors. The Mandrel Pulley 38 is the part...
This part is the OEM part from the Husqvarna manufacturer. The mandrel deck assembly is constructed of high-quality, metal parts. This item is compatible with lawn and garden tractors, and secures the blade 16 1/4 to the...
This is a genuine replacement part manufactured for use with lawn tractors from Craftsman. This part applies pressure on the pulley to stop the blades from turning when the blades are released. It is recommended to revi...
This hardware is an authentic OEM sourced item. It is a specially manufactured for use with lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This part has ...
This genuine Craftsman shaft assembly is an original replacement part sourced directly from the manufacturer and is designed for use with riding lawn mowers. It fits into the mandrel housing and serves as a critical conn...
This genuine manufacturer sourced hardware is designed for use on Husqvarna and Poulan riding lawn mowers and tractors. This hex nut has multiple applications depending on the model. Please make sure to check appropriate...
This is a genuine replacement part that is sourced directly from the original equipment manufacturer for use with Husqvarna lawn mowers and garden tractors. It is the part that the belt attaches to and it helps to rotate...
This authentic replacement part is made for use with riding lawn mowers/tractors. Mulching blades are designed to keep the grass under the deck longer. That way it will be cut into smaller pieces, providing better mulch ...
This is a special item that provides a tight fit between connected parts. Over time it may wear out, get damaged or lost eventually requiring a replacement. Check the appropriate diagrams for your model to ensure the pro...
This is an authentic manufacturer-sourced part that is specially made for use with Poulan, Husqvarna and Weed Eater riding lawn mowers and garden tractors. The pulley is used to connect the belt and the mandrel spindle t...
This is an original part from Husqvarna, Poulan, and Jonsered for use with Lawn Tractors. The mandrel shaft assembly rotates the blade under the mower deck. The mandrel shaft assembly includes the shaft and the bearing. ...
This is a genuine manufacturer-sourced part which is specially designed for use with Craftsman Lawn Tractors and Riding Mowers. The Drive pulley attaches to the transmission and drives the transmission shaft to move the ...
This is an authentic manufacturer made replacement part which is specially designed for use with Craftsman riding lawn mowers. The pulley applies tension to the blade belt to allow the engine to start. This part is made ...
This is an OEM part sourced directly from the manufacturer. The flange nut is commonly found in lawn tractors and riding mowers from Poulan, Husqvarna, and Weed Eater. This part is made of metal, and is generally used ...
It is a genuine OEM sourced item that is specially designed for use with Husqvarna riding lawn tractors. This replacement bearing allows mandrel assembly which holds the mower blade to spin freely with minimum friction. ...
This is a genuine replacement part manufactured for use with riding lawnmowers. The shaft assembly is often called the spindle shaft, and is used to drive the cutting blades. The shaft includes the lower bearing towards ...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
View Less
Model Compatibility
This part works with the following models:
Fix Number: FIX9286886
Manufacturer Part Number: 532187690
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.