This shunted brush is a carbon motor brush with a shunt wire. It is sold separately, however your lawnmower will have two of these, so you should consider replacing both at the same time. These two shunted carbon brushes are attached to the motor. They are in continuous contact with the spinning commutator, so they tend to wear over the use of your equipment. Replacing these brushes should be part of your regular maintenance. When the brushes are worn, this can stop the motor from being able to turn on or only turn on occasionally. A malfunctioning armature can act much the same way, so it is important to inspect it as well.
Works with the following brands:
Black and Decker
Works with the following products:
Lawn Mower
Works with the following brands:
Black and Decker
Works with the following products
Lawn Mower
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lee
April 1, 2022
Will these brushes work with b&d gh3000 trimmer?
For model number gh3000 string trimmer
Hello Lee, thank you for writing. For us to locate the correct parts, we will require the model number of the engine. Once you have located the model number, please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Shen
June 13, 2023
I bought a brand new Black & Decker electric mower (MM850) 24 years ago. It is an incredible and reliable tool. I really like this mower.
Recently I have an issue with the mower. During cutting, the machine is on and off. I did continuity check of the electric cord. The result is good. The switch on the handle of mower seems working. Please advice which parts I should check? (Some video suggests there might be issue with brushes. How to know that?)
Greatly appreciate your expertise and help.
For model number black & decker MM850
Hi Shen, thank you for reaching out. Based on the description that you have provided, we recommend checking the shunted brush, part number FIX9927365. When the brushes are worn, this can stop the motor from being able to turn on or only turn on occasionally. We hope this solves your problem!
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Wheel replacement requires prying the locking ring off, removing old and reinstalling new wheel, then hammering locking ring back on. Brush replacement requires removal of the plastic housing of the mower, it doesn't come off all the way due to handle still being on but does move enough to reach in and work. On top of the electric mo
... Read moretor are the 2 brushes under cover pieces. For each brush; remove cover held on by 1 screw, pull out spring retaining holder with brush, cut or pry open old crimp, then crimp new brush to wire, install new brush in spring holder, install in motor, reinstall cover. Final step is to reinstall plastic housing and tighten all the screws.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
