See part 15 in the diagram
( Grid squares measure 1x1 inch )
Wheel
$11.28
In Stock
Fix Number: FIX11925164
Manufacturer #: 242404-05
Manufactured by:
DeWALT
-
Works with the following brandsBlack and Decker
-
Works with the following productsLawn Mower
-
Part Number Cross ReferencePart# 242404-05 replaces these:P242404-05
Product Description
-
Works with the following brands:Black and Decker
-
Works with the following products:Lawn Mower
-
Part# 242404-05 replaces these:P242404-05
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Kevin from ALCOVE, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Lacking power and wheel wobbles
Wheel replacement requires prying the locking ring off, removing old and reinstalling new wheel, then hammering locking ring back on.
Brush replacement requires removal of the plastic housing of the mower, it doesn't come off all the way due to handle still being on but does move enough to reach in and work. On top of the electric motor are the 2 brushes under cover pieces. For each brush; remove cover held on by 1 screw, pull out spring retaining holder with brush, cut or pry open old crimp, then crimp new brush to wire, install new brush in spring holder, install in motor, reinstall cover. Final step is to reinstall plastic housing and tighten all the screws.
Brush replacement requires removal of the plastic housing of the mower, it doesn't come off all the way due to handle still being on but does move enough to reach in and work. On top of the electric motor are the 2 brushes under cover pieces. For each brush; remove cover held on by 1 screw, pull out spring retaining holder with brush, cut or pry open old crimp, then crimp new brush to wire, install new brush in spring holder, install in motor, reinstall cover. Final step is to reinstall plastic housing and tighten all the screws.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11925164
Manufacturer Part Number: 242404-05
Manufacturer Part Number: 242404-05
Brand
Model Number
Description