Poulan Trimmer Seals and Gaskets

Fix Number

FIX9030255

Manufacturer Part Number

545008086

This is an authentic OEM sourced part that is intended to be used with trimmers and brushcutters from Husqvarna and Jonsered. The gaskets are used to mount the carburetor to the engine's intake. It is recommended to replace the gaskets when servicing the carburetor to ensure proper seals when the parts are reassembled.

Fix Number

FIX9285128

Manufacturer Part Number

530069844

This is a carburetor repair kit, but it may also be known as a carburetor gasket or diaphragm kit, for your lawn equipment. This assembly is used to replace the gaskets in your machine. If you are having problems with your carburetor, this kit most likely takes care of it. Note: The beige piece pictured has been redesigned. It no longer has the 4 corner holes. It now only has 2 corner holes at a diagonal. To replace these items, you will need a screwdriver and pliers.

Fix Number

FIX9016925

Manufacturer Part Number

532197480

This is an authentic manufacturer-approved part which is specially designed for use with lawn and garden equipment. It helps to provide a tight seal between connected components. Unfortunately, over time it may wear out and it may begin to crack eventually requiring a replacement. Keep in mind this high-quality item is made of durable rubber and is sold individually. Please make sure to check the diagrams of your model for the correct location and application of this hardware.

Fix Number

FIX9030153

Manufacturer Part Number

545008084

This gasket foam kit is an OEM direct from Husqvarna. Made for use with many lawn trimmer devices, the kit provides sealing items for the motor. The gasket foam kit includes seals, gaskets and other items for the repair. A screwdriver, pliers and an adjustable wrench are needed for the replacement.

★★★★★

★★★★★

1 Review

Fix Number

FIX12602552

Manufacturer Part Number

530071750

This is a Manufacturer Approved replacement kit used on a variety of Gas Trimmers/Pruners. This gasket set includes the major gaskets to replace when rebuilding the engine. Its purpose is to make an air tight seal so that no air/oil leakage occurs. Over time gaskets tend to deteriorate and will need to be replaced. Gaskets in this kit are made out of Composite Material and O-Rings are made out of Rubber.

Fix Number

FIX9981061

Manufacturer Part Number

574672401

Fix Number

FIX16365371

Manufacturer Part Number

545008044

This is a genuine Poulan overhaul engine kit designed for gas trimmers. This kit contains the necessary gaskets and seals needed to rebuild you engine. If engine runs sluggish or it dies shortly after starting it, you may need to replace some of the gaskets. Replacing these items you would need a screwdriver and pliers.

Fix Number

FIX9005054

Manufacturer Part Number

530069616

Fix Number

FIX18528481

Manufacturer Part Number

574682801

This is a genuine replacement part sourced directly from the manufacturer. The gasket is found in Poulan hedge trimmers. This part is made of flexible plastic, and is used to seal the connection between the upper and lower gear box assembly. You may require a wrench or Allen key when replacing this item. The gasket is sold as an individual replacement part.

Fix Number

FIX16352391

Manufacturer Part Number

530019264

This is an original part from Craftsman for use with Leaf Blowers / Vacuums, Trimmers, and Hedge Trimmers. The seal crankcase prevents oil leaks between the crankshaft and crankcase opening. The most common reason for replacing the seal crankshaft is if there is leakage on the crankshaft, leakage from the crankcase, the oil seals are worn or damaged, the bearings are grinding or bearing seizures. This part is sold individually. Here is a list of tools that are needed to replace the seal crankcase is a receptacle for draining fuel, Torx wrenches, spark plug wrench or socket, a 10mm wrench (or adjustable), long-nosed pliers, rubber mallet, standard screwdriver, starter rope (or similar), adjustable pliers, socket set, 2-cycle engine oil (for lubricating seals), razor blade (to scrape gasket surface), and an ignition gapping gauge.