Husqvarna Lawn Tractor Belts

Fix Number

FIX16380739

Manufacturer Part Number

592855201

Fix Number

FIX9982769

Manufacturer Part Number

584453101

This is an OEM part sourced directly from the manufacturer. The belt is designed for use in Craftsman lawn tractors and riding mowers. This part is made of flexible rubber, and is used in conjunction with the pulley assemblies to transfer power from the engine to the mower blades. Over time, it may become brittle and cracked, requiring replacement. You may need a wrench when replacing this part. This item is sold individually

Fix Number

FIX17016841

Manufacturer Part Number

598559101

This Genuine OEM drive belt is a manufacturer-sourced component designed for use with select Craftsman riding lawn mowers and garden tractors. Made from high-quality, durable rubber and sold individually, this belt serves as a direct replacement for a worn or missing original part. It plays a critical role in the mower’s operation by transferring power to rotate the blades, ensuring consistent cutting performance. Over time, belts can wear, crack, or stretch, leading to reduced efficiency or complete failure. Replacing the drive belt restores proper function and helps maintain the longevity of your equipment. For accurate installation and compatibility, please consult your model’s owner’s manual and parts diagram to verify the correct location and application of this component.

Fix Number

FIX16370615

Manufacturer Part Number

580364609

Fix Number

FIX16370616

Manufacturer Part Number

580364610

Fix Number

FIX9011522

Manufacturer Part Number

532144959

This is a genuine replacement belt sourced directly from the original manufacturer, designed for use with riding lawn tractors and mowers. Made from durable rubber and sold individually, this belt is responsible for driving the mower blades, making it a critical component for cutting performance. To ensure optimal function and longevity, it’s important to clean the pulleys before installing the new belt and to inspect the belt regularly for signs of wear or stretching. Replacing the belt requires a wrench set and pliers. For safety, always disconnect the spark plug wire before beginning. Start by lowering the mower deck to its lowest position and setting the blade engagement lever to the "Off" position. Roll the old belt off the engine pulley from between the belt guide and pulley. Remove the mower deck by taking out the bow-tie pins securing the left and right lift arms, then disconnect the blade engagement cable. Next, remove the bolts from the mower deck belt pulley covers and take off the covers. Loosen, but do not remove, the nuts on the top of the idler pulleys. Install the new mower deck belt through the belt guides and around the pulleys, then tighten the idler pulley nuts. Finally, reassemble the deck to complete the repair and restore your mower’s cutting performance. Lawn mower deck belt. Width: 1/2 " Length: 95 1/2 ".

Fix Number

FIX17016487

Manufacturer Part Number

593773401

This is a genuine replacement belt sourced from the original manufacturer, designed for use with riding lawn mowers and tractors. Made from durable rubber and sold individually, this belt is responsible for driving the mower blades, making it a key component for effective cutting performance. To ensure optimal operation and extend the life of the belt, it’s important to clean the pulleys before installation. Regular inspection is recommended, and the belt should be replaced if it becomes worn or stretched. A set of wrenches is required to complete the installation.

Fix Number

FIX11824864

Manufacturer Part Number

587686701

Fix Number

FIX11965490

Manufacturer Part Number

532125907

This is an OEM drive belt for lawn tractors. It is also commonly referred to as a v-belt or ground belt. It measures approximately 1/2-inch by 90-inches. It turns the transmission pulley to move the lawn tractor. If the lawn tractor is not moving, is moving sluggishly or the wheels are not turning, it is likely due to a broken or worn drive belt. Please note this belt is sold individually and you may require a 5/8-ich socket and pipe wrench for the repair

Fix Number

FIX17016497

Manufacturer Part Number

531169501

This is a genuine OEM replacement part designed for use with Weed Eater, Poulan, and Husqvarna riding lawn mowers and garden tractors. The left-hand belt keeper plays a crucial role in stabilizing the belt while minimizing friction, ensuring smooth and efficient operation. If your original part is damaged or missing, this durable metal component offers an exact replacement to restore your equipment to its original performance. Please refer to your model’s diagram for proper installation. Note: This listing includes one left-hand belt keeper. The right-hand belt keeper is sold separately. A wrench set is required to disassemble the deck for installation.