Official MTD Lawn Mower Hoses and Tubes

Tube-breather

$13.25

Fix Number: FIX9306838
Manufacturer Part Number: 794683

This item is an authentic OEM replacement part that is intended to be used with small engines from Briggs & Stratton. The breather tube is used to guide the direction of excess gasses and fluid that escape the engine from a higher level of internal pressure. The breather tube is a single item, please see the model diagram for related parts.

Vacuum Hose

$12.65

Fix Number: FIX12089844
Manufacturer Part Number: 596163

This vacuum hose is a genuine OEM replacement designed for small engine fuel systems. It connects the valve cover to the fuel pump, supplying the pressure pulse needed for proper fuel pump operation and consistent fuel delivery. Made from durable, heat- and oil-resistant material and often pre-formed for an exact fit, it’s an ideal replacement when cracked or leaking hoses cause hard starting, stalling, or poor engine performance.

Tube- Breather

$6.51

Fix Number: FIX9896185
Manufacturer Part Number: 15721-ZM0-000

The breather tube attaches to the air cleaner case assembly and is available individually. It is made of rubber and may require a screwdriver and a wrench during replacement if it becomes broken. This is an authentic replacement part sourced from the original manufacturer for use with Honda small engines and Toro lawn mowers. The tube helps to vent air out of the engine.

Water Nozzle Adaptor

$36.79

Fix Number: FIX9159286
Manufacturer Part Number: 921-04041

This special item is attached to the deck allowing a garden hose to be connected to clean under the deck. It is an identical replacement for a damaged or a missing hardware that was included with a new equipment. Keep in mind this high-quality part is made of durable plastic and is sold as an individual item. It is a genuine OEM supplied water nozzle adaptor which is made for riding lawn mowers and garden tractors.

TUBE

$6.51

Fix Number: FIX9310275
Manufacturer Part Number: 92191-7027

This fuel return hose is a genuine OEM replacement used on small gasoline engines to route excess fuel back to the tank, typically as part of the carburetor purge system. Made from flexible, durable material, it helps ensure proper fuel circulation and smooth engine operation and is an ideal replacement when the original hose is cracked, hardened, or leaking, which can cause starting issues or poor running.

Tube-breather

$13.43

Fix Number: FIX12648318
Manufacturer Part Number: 596501

This breather tube is designed for small engines to support proper crankcase ventilation by routing excess pressure, oil mist, and fuel vapors back into the intake system. By preventing pressure buildup inside the engine, it helps promote smooth operation, reduce emissions, and support long-term engine durability. It’s a simple, direct replacement for maintaining reliable performance when a breather tube becomes brittle, clogged, or damaged.

Tube-breather

$12.66

Fix Number: FIX12642034
Manufacturer Part Number: 594163

This engine breather tube is used to vent crankcase gases and maintain proper internal pressure during engine operation. Made from durable rubber or plastic, it helps reduce vibration, prevent oil leaks, and protect internal components from excess pressure buildup. It’s a direct replacement for worn or cracked breather tubes to restore proper engine ventilation and reliable performance.

Tube- Fuel

$13.07

★★★★★

1 Review

Fix Number: FIX9908823
Manufacturer Part Number: 17702-ZM0-800

This genuine manufacturer-sourced part is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is the tube that the fuel travels through, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is an identical replacement for a missing or a faulty tube that was installed on a new unit. Keep in mind this high-quality item is made of durable rubber and is sold individually.

Breather Hose

$14.84

Fix Number: FIX9885525
Manufacturer Part Number: 1232603-S

Hose-vacuum

$10.78

★★★★★

1 Review

Fix Number: FIX9306672
Manufacturer Part Number: 791766

This genuine part is sourced directly from the original equipment manufacturer. It is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this hose is to transfer vacuum from the engine. Unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. Note, this item includes one durable rubber hose and two metal clamps to secure it.

MTD Lawn Mower Hoses and Tubes

Popular MTD Lawn Mower Hoses and Tubes

Related MTD Lawn Mower Parts

MTD Lawn Mower Hoses and Tubes

Start With Your Model Number

Popular MTD Lawn Mower Hoses and Tubes

Related MTD Lawn Mower Parts