Lawn Mower Carburetors

Fix Number

FIX8984098

Manufacturer Part Number

498260

This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carburetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.

Fix Number

FIX9898058

Manufacturer Part Number

16100-Z0L-023

If the carburetor is damaged or clogged it may cause your engine to run rough or not start at all. The carburetor can sometimes be cleaned or rebuilt, but it likely needs to be replaced. This part includes the complete carburetor and is sold individually. When replacing the carburetor, it is also an opportune time to clean the fuel tank and replace the fuel filter, which are sold separately. This OEM carburetor is designed by the manufacturer, ensuring the best possible performance.

Fix Number

FIX9899046

Manufacturer Part Number

16211-ZL8-000

This is a manufacturer-approved carburetor insulator, which helps to minimize the transfer of heat from the engine to the carburetor. By providing insulation, it helps to protect damage to the carburetor and ensures the safe operation of your small engine. This part can start to deteriorate over time, in which case it should be replaced right away. This OEM part is designed to work with small engines in a variety of different model-types, such as lawnmowers, snowblowers, generators, and more. This part is sold as an individual part.

Fix Number

FIX9067198

Manufacturer Part Number

694395

This is an OEM primer bulb and clip. It is attached to the engine air filter base. When the primer bulb is pushed, this fills the carburetor with fuel, making it easier to start a cold engine. This rubber primer bulb is known to harden and crack over time. For this repair you will start by removing the motor cover, air filter cover, air filter, and then the primer base. You will then use a screwdriver to release the clip holding the primer bulb in place. To install the new primer bulb, place the new clip so the ears are facing out, and then line the ears up with the openings on the base. You will then use your screwdriver to help snap it into place.

Fix Number

FIX12125846

Manufacturer Part Number

16100-Z8B-901

This carburetor assembly is supplied by the original equipment manufacturer. It is attached to the engine intake manifold where it combines the right proportion of fuel and air and delivers it to the engine. If you are experiencing issues such as rough idling, hard starting, low power output, and excessive fuel consumption, and you have inspected all other equipment parts for fault, you will need to replace the carburetor. To begin the repair, ensure the equipment is switched off, and the fuel tank is drained. Remove the engine housing to access the carburetor. Remove the mounting hardware that secures the carburetor and pull it off the engine. Replace the appropriate gaskets if they are worn down or loose. Place the new carburetor on the engine and install the fasteners to hold it in place. Refill the fuel tank and reassemble the engine housing to complete the repair.

Fix Number

FIX9898080

Manufacturer Part Number

16100-Z0Y-813

It is an authentic OEM sourced component which is specially made for use with Honda engines commonly installed on lawn and garden equipment. The purpose of a carburetor is to mix air and gas before the fuel goes to the engine. If the engine won\'t start and the tank is full of fresh fuel or if the engine starts and then quickly dies, the carburetor is likely the problem. It provides an identical replacement for a missing or a faulty assembly that was installed on a new unit. Keep in mind this high-quality metal body carburetor is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

Fix Number

FIX9899093

Manufacturer Part Number

16220-ZE1-020

This part is a genuine OEM item that has been sourced to be used with Honda small engines. This spacer is used as a link between the carburetor and the air cleaner elbow. The carburetor spacer is priced as an individual part, please note associative parts are available separately.

Fix Number

FIX12633465

Manufacturer Part Number

587623001

This is a genuine replacement part sourced directly from the manufacturer. The bracket link assembly is found in lawn mowers from Husqvarna and Poulan. This part is made of metal, and is used to connect the rear suspension link with the rear suspension arm. You may require a wrench when replacing this item. The bracket link assembly is sold as an individual replacement part.

Fix Number

FIX9899091

Manufacturer Part Number

16220-ZA0-702

This item is an authentic Honda replacement part that has been sourced from the original manufacturer to be used with small engines. This item is used to provide spacing between the carburetor and the air cleaner assembly. The carburetor spacer is priced as a single item.

Fix Number

FIX8963322

Manufacturer Part Number

398188

Genuine manufacturer approved carburetor needle valve for lawn and garden equipment engines. This item includes the seat. The needle valve opens and closes to control the flow of fuel into the carburetor. Make sure to disconnect the spark plug wire and drain all gasoline from the carburetor and fuel tank before starting a repair.