Official Black and Decker Lawn Mower Springs and Shock Absorbers

SPRING, SPOOL COVER

$6.51

Fix Number: FIX18988535
Manufacturer Part Number: 90566944

This is an OEM spring located between the spool and spool cover of your trimmer. It is designed to hold the spool in position. This spring can lose tension over time and may cause the trimmer head to feed too much line or not feed any line at all, indicating the need for a new spring. The spring applies pressure to the spool, pulling it firmly next to the top of the trimmer head and lever. The lever is what regulates the amount of line coming out of the spool. This repair could not be any easier, simply remove the trimmer head cap by pushing down on the two tabs on either side. This will expose the spring, which you will see positioned onto a tab on the cap, and can just be pulled off, and a new one can be installed in its place.

Watch the install video

SPRING, BALE HANDLE BUTTON

$6.51

Fix Number: FIX18988378
Manufacturer Part Number: 90559866

This is a genuine Black and Decker replacement part that has been sourced from the original manufacturer to be used with trimmers. The metal spring is part of the cutting head assembly. The spring is used to provide compression between the cap and the spool. The spring is priced as a single item.

Spring,brush

$6.51

Fix Number: FIX9927353
Manufacturer Part Number: 242207-00

This is an authentic Black and Decker replacement part that has been sourced from the original manufacturer to be used with electric lawnmowers. The metal spring is used with the brush holder assembly and fits into the end cap to keep the carbon brushes pressed against the motor's armature. This item is priced as a single item, please note two may be required.