Jump to:
Product Description
This is an original Ryobi replacement part manufactured for use with impact drivers. The switch transfers electricity to the brushes, and can wear out over time. Symptoms of a bad switch are not turning on or off, and not changing speeds or directions. Replacing the switch on an impact driver is straight forward. You start by separating the two housing halves, and removing the motor. Disconnect the brushes, and remove the faulty switch. Then align the new switch, and reconnect the brushes. Be sure to run the wires in a direction to avoid pinching. Then just reconnect the motor, and halves of the housing. This switch is sold individually, the tools required are a screwdriver, and possibly needle nose pliers.
-
Works with the following brands:Ryobi
-
Works with the following products:Impact Driver
- Works with the following brands:
- Ryobi
- Works with the following products
- Impact Driver
Questions and Answers
Be the first to ask our experts a question about this part!
Related Parts Additional or alternate parts to consider.
- < Prev
- 1
- Next >
Model Compatibility
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.