Ice Cutting Grid Wire 4387020
Works With Model JIM158XXCX1!
$60.67
In Stock
- Fix Number:
- FIX370853
- Manufacturer #:
- 4387020
- Manufactured by:
- Whirlpool
Works With Model JIM158XXCX1!
Jump to:
Product Description
There is approximately 10'of wire. Note:2 kits are needed to replace both directions.
-
Works with the following brands:KitchenAid, Whirlpool, Kenmore, Jenn-Air
-
Works with the following products:Ice Maker
-
Part# 4387020 replaces these:AP3108059, 585796, 2174754, 4387020
- Works with the following brands:
- KitchenAid, Whirlpool, Kenmore, Jenn-Air
- Works with the following products
- Ice Maker
- Part# 4387020 replaces these:
- AP3108059, 585796, 2174754, 4387020
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Maria from Barberton, OH
- Parts Used:
- 4387020
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
One of the wires on the isce cutting grid was broken.
My husband repaired it. It took him less than ten minutes. He said it was very easy and not time consuming at all. Will not be hesitant to order from you again.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dennis from Shawnee, KS
- Parts Used:
- 4387020
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Replacing cutting grid wire
Removal of the cutting grid assembly is very easy. 2 1/4 inch screws to remove on each side, then disconnect the wiring from the plugs on each side and lift out. There is a screw on each end of the wire holding it down. Simply loosen those to take the old wire off. Start at one end by wrapping around the first screw and tighten the screw
... Read more
down to hold in place. Then begin wrapping the wire from end to end. I used needle nose pliers to keep it as rigid and tight as possible. I also used my fingers to straighten while I pulled tight. Then wrap the other end around the second screw and you are done. Worked like new.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Overland Park, KS
- Parts Used:
- 4387020
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Ice Cutting Grid Wire broke
This is a fairly easy repair. The challenge is keeping the new wire taut to eliminate kinks and create a uniform wire grid. I have a recent model, and my grid cutter doesn't have wire tension-adjustment screws. I couldn't pull the wire tight enough by hand, and I didn't want to risk damaging the wire by using pliers to grip it. Inste
... Read more
ad I used a small piece of 1-1/2 inch pvc pipe to coil the new wire and then feed it out slowly around the cutter guides. I pulled on the pipe to keep the wire taut. I had a helper hold the cutting grid while I looped the wire around each guide. It only took a few minutes to attach the new wire. The results were excellent.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX370853
Manufacturer Part Number: 4387020
Manufacturer Part Number: 4387020
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.