We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vikram
June 18, 2022
Does the pump come by itself or with seating frame
For model number KUIS18PNXB
Hi Vikram,
Thank you for your question. There is a bracket that the pump attaches to. The part number listed under your model number for the bracket is FIX12349200. The pump and bracket are also available in a water pump assembly. The part number listed for the water pump assembly is FIX1484571. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
This part is a drain pump for your ice maker. When you flush the reservoir on your ice maker to remove impurities, the drain pump is the part that removes the water from the reservoir. This is an authentic OEM part sourc...
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 3.4 / 5.0, 4 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
checked unit. compressor running, water in tray, wire cube cutter warm. no water running up to the freezer tray. 2 thumb screws remove the water tray. the recirculate pump will be the lowest thing. apprx 2.5" by 2.5 with a hose in the bottom. I don't remember if there is enough room to remove the pump without taking off the 3 screws for t
... Read morehe pump holder. you will also need to remove the 1 screw for the upper cover to unplug the recirculate pump.To get it out of the holder just squeeze the sides of the pump and it will wiggle out. I took everything apart and took the time to clean everything. It will have mold in it so its a good thing. Clorox clean up works great spray and wait about 15 min and rinse good. This job is easy. what is difficult is reaching in to get to the parts. its a little frustrating. all screws are hex head you'll need nut drivers. also put a piece of tape over the drain hole in back so you don't lose a screw. while your cleaning, take off the 4 screws for the bottom cover for the refrigeration unit and clean the coils (in front) with a vacuum brush end. It will let the unit work better. This is my second time buying from partselect. no issues, fast service. much cheaper than calling a repair person.
Board diagnostics stop at Cir pump. Replaced circulation pump. Made half of one cycle of ice. Stopped. Replaced control board. Problem solved. But, set thermosensor too low on bin wall. Made one cycle of ice and stopped. Set thermosensor higher on bin wall, just above the front threshold of the bin, now all is working great. Control cir
... Read morecuit board swap was easy except for the 2 rear screws that hold the control panel case to the bin. The holes for these screws are not visible without a mirror and are tricky to start.
Feel like I made $300! Quoted $ 350 for repair... Was told over the phone "those pumps are real expensive". 5 screws and a plug and pump was out... Exact match for 55.40 plus shipping... Reinstall in 20 minutes... EXTREMELY easy... BOOM working like a charm
Easy. Removed a few nuts with nut-driver and then pliers. Unplug pump and remover from housing with flat head screw driver. Replaced with new pump, then plug in. Reinstall nuts. Turn on unit. It began making ice.
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX16730541
Manufacturer Part Number: W11566405
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
