9935480-1-M-Homelite-290441001-Brush Assembly
Part Location Diagram of 290441001 Homelite Brush Assembly
See part A-51 in the diagram
9935480-1-S-Homelite-290441001-Brush Assembly 360 view
( Grid squares measure 1x1 inch )
9935480-1-S-Homelite-290441001-Brush Assembly 9935480-1-S-Homelite-290441001-Brush Assembly 360 view
Part Location Diagram of 290441001 Homelite Brush Assembly

Brush Assembly 290441001

$ 5.32
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX9935480
Manufacturer #:
290441001
Manufactured by:
Homelite

Product Description

This is is a genuine OEM sourced replacement brush assembly designed for use with generator motors. This assembly secures carbon brushes around the armature and provides stable and safe contact. This assembly includes: plastic holder, two (2) carbon brushes with lead wires and springs attached. To replace this assembly you would need a set of wrenches. • First remove screws holding the cover together • Carefully separate housing to gain access to armature and brush holder • Disconnect wires from old brushes • Remove old brushes and install the new assembly • Reassemble and test the motor

  • Works with the following brands:
    Homelite, Husky, Ridgid
  • Works with the following products:
    Generator