KitchenAid Food Waste Disposer Splash Guard WP4211334 |

Splash Guard

Splash Guard – Part Number: WP4211334
Splash Guard – Part Number: WP4211334
Splash Guard – Part Number: WP4211334
Click for the BBB Business Review of this Appliances - Small - Supplies & Parts in Dartmouth NS
Part Description:
This is a flexible rubber cover that fits over the top of the sink drain. It opens up in the middle and will allow you to feed water or food items into a garbage disposal while keeping liquids and smaller food particles from splashing back into the sink.
This part works with the following brands:
Part number cross reference:
This part works with the following products:
Food Waste Disposer.

Installation Instructions

Showing 1-1 of 1 Instructions

There were 2 problems. KitchenAid does not have installation instructions for this model. One step in the take down/installation wwas tough.

I found that while KitchenAid did not have any info on KCD1250S1, it did have instructions for KCBD250S1 and the two are very similar. so I used those instructions - which were not as complete as one would like, but with some experimentation they gave me enough clues that it worked. First, do not remove the red cover or the Styrofoam that is underneath the plastic. Second, the removal of the disposal was easy once I learned that the key was to stick a Allen head screwdriver into one of the round metal openings that hide above the red plastic cover. Then shove the screwdriver (which will rotate the metal fitting) clockwise when you are underneath looking upward. Catch the heavy disposal when it decides to come loose. Do everything to get the new parts into place, it's easy. Put the Flange, seals and brackets in place and tighten the screws. The next step is putting the screwdriver into one of the rotating flange metal holes, then forcing the heavy disposal completely up into the flange fitting (I had to look down through the sink drain hole and guess where everything really was), and shoving the screwdriver (rotate the flange) counter clockwise, again when looking up from beneath the disposal. I suspect that if you do this a few times it gets easier. It now works perfectly.

Were these instructions helpful?

1 of 1 people found these instructions helpful
Parts Used: Splash Guard , Sink Flange Gasket/Seal , Strainer Flange
Difficulty Level: A Bit Difficult
Total Repair Time: 1- 2 hours
Tools: Screw drivers
Customer: Greg from Ridgefield, WA
Showing 1-1 of 1 Instructions

Model Cross Reference List

This part works with the following models:

Fix Number: FIX11742344
Manufacturer Part Number: WP4211334

Brand Model Number Description
KitchenAid4KCDS250S0Food Waste Disposer
KitchenAid4KCDS250T1Food Waste Disposer
KitchenAid4KCDS250T2Food Waste Disposer
KitchenAid6KCD1250V0Food Waste Disposer
KitchenAid6KCDC250T0Food Waste Disposer
KitchenAid6KCDI250V0Food Waste Disposer
KitchenAid6KCDS250V0Food Waste Disposer
KitchenAid6KCDS250V1Food Waste Disposer
KitchenAid7KCD250T0Food Waste Disposer
KitchenAid7KCDC250S0Food Waste Disposer
KitchenAid7KCDC250T0Food Waste Disposer
KitchenAid7KCDS250T0Food Waste Disposer
KitchenAid7KCDS250T1Food Waste Disposer
MaytagDFC0300AAXFood Waste Disposer
MaytagDFC3000AAXFood Waste Disposer
MaytagDFC5000AAXFood Waste Disposer
MaytagDFC7000AAXFood Waste Disposer
MaytagDFC7500AAXFood Waste Disposer
MaytagFC1Food Waste Disposer
MaytagFC3Food Waste Disposer
Jenn-AirGC100Food Waste Disposer
WhirlpoolGC4000XEFood Waste Disposer
Jenn-AirGC75Food Waste Disposer
KitchenAidKCBC250XFood Waste Disposer
KitchenAidKCBC250X0Food Waste Disposer
KitchenAidKCDC250S0Food Waste Disposer
KitchenAidKCDC250XFood Waste Disposer
KitchenAidKCDC250X0Food Waste Disposer
KitchenAidKCDC250X1Food Waste Disposer
KitchenAidKCDI075V0Food Waste Disposer