Gasket Set

undu the gas lines that goes to the shut off and the carb to drain the tank. then undu the top by 3 nuts to lift off the top to drain the rest of the gas/water in the tank. the put the top back on. for a good seal the carb has only 2 nuts holding it to the engine. undo the float bowl and drain the water/gas, then undo the carb. put a tiny ... Read more amount of glue on the new float bowl gasket and let it dry. once the glue drys put the float bowl on ( snug tight ) then when u put on the carb, on the first part that u pulled apart closes to the engine slightly push or pull the valve so it won't move when u put it together ( makes is easy when u do it. ) if u don't it is very hard when u put it together ) when u have the carb back on the engine, use ur finger back of the carb to reset the first part . if u do not do this the engine will NOT start.