Detergent Dispenser with Rinse Cap

followed the video

The video was excellent and made the job a snap. I turned off the electricity off at 3:33pm,followed the instructions which explained everything,and electricity back on at 3:41pm.

Remove inner door panel. Remove and replace dispenser unit. Reassemble inter door panel.... It helps if you tape the dispenser in place from the inside of the door panel so that you can properly place the retainer brackets and start the screws. I also put a small amount of plumbers valve grease on the dispenser seal just to prevent lea ... Read more ks. If you have one, use a screw gun as there are a bunch of screws to remove/reinstall.

watch video

i watched the instructional video once, then watched it again and paused as needed. I've never attempted to fix anything before!

Used video instruction on utube

I removed the screws holding the door together. Then I was able to remove the electrical connections with a pair of pliers. Then I was able to remove the 6 screws that held the dispenser in place. I installed the new dispenser easily and reassembled the door in reverse order based on how I took it apart.

Followed your video installation recommendations taking care not to overtighten dispenser mounting screws. It leaked! Took apart again, lightly coated o-ring with silicone grease and made fasteners slightly tighter. Reassembled door and all is well.

we watched the video on your web site. first we turned off the power to the dishwasher. Then we removed all the screws on the door - gently lowered the frame/door down. we disconnected the control panel and set aside. we then removed the screws around the dispenser, popped the old one out and the new one - put screws back in - reattached ... Read more the control panel - then reattached back to front door panel. turned power back and all fixed. the video was perfect!

Watched the video which made it so easy. Thanks!