Timer

My husband did

Replaced the timer but that wasn't the problem. It was the timer knob. After examining the timer knob,I went and bought a new one,and fixed the problem. Please replace the knob first before replacing the timer. It takes 10 seconds to replace the knob.

I looked it up on you tube.

After dropping the top of the dryer I found the problem ordered the part and replaced the timer now working and like new.. Thank you..

New timer

Unscrewed the front panel, twisted off the timer and using the pliers I disconnected the wires one at a time while simultaneously connecting the wire to the new timer. Placed the new timer on the panel with a simple twist. Replaced panel and screws. Placed on new timer knob. Wahla! Received my parts in 2 days and it took me less than 15 m ... Read more inutes total time to do

I used your instructions, and it was very simple to repair.

Easy,remove back of control panel with Phillips screwdriver, remove the timer knob may need a flat screwdriver to do this, now the timer can be removed from the back of front panel just twist and pull the timer out plenty of slack wire, remove blade connections one at a time (may need pliers) and install on new timer at same location, whe ... Read more n complete re-install timer as you removed it by twisting it into place,install back panel, on the stem of old timer or still inside the knob you will see a metal piece you need this piece as the stem is too small without it.