This is a bevel gear, also referred to as a drive gear or tension gear, and is used in chainsaws. This authentically sourced part is sold individually. It is part of the chain tensioning assembly, aiding in loosening and tightening the chain on the chain bar. Once the chainsaw has be disassembled, the drive gear can be found on the underside of the clutch cover. You will need to remove the tension bracket screw, lift the adjustment assembly out, remove the bracket, and pull off the old bevel gear. Install the new bevel gear by sliding it onto the square end of the adjustment bolt, and reassemble.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
