We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Margot
October 25, 2021
How long is the cable? I bought one online and it is about 3” too long. The auger cable was perfect. Could I use an auger cable for a drive cable? Thanks.
For model number 31ae644e129
Hi Margot,
Thank you for your question. The length of the cable is 35 inches. The length of the cable and spring end is 37 inches. The total length with both ends is 43 inches. It is recommended to use the correct drive cable for your snow blower. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 2.3 / 5.0, 1 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Drive would Slip in and out then unable to engage traction control.
Removed frame cover. Found broken Idler Spring. This is what cause the slipping and clunking noise. also check or replaced as I did.t The Extension Spring is a little harder to get to. With the idler spring broken this cause the friction wheel and support bracket to break the Drive Clutch Cable Spring and Support Bracket Spring. Easy to
... Read more replace. At this time clean and oil the part called 7-tooth shaft. This helped shifting speeds. Be careful not to get any oil on the friction wheel or the friction disc. FYI Problems like this will always happen at the wrong time. The web site easy to use but the illustrations and part numbers could be better to read. Need to have clearer zoom and part number to part. Not sure part name like spring-extension or extension-spring. So I purchased both parts. This snow blower easy to use and repair. A simple design.
Read less
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX9170572
Manufacturer Part Number: 946-0898
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of 946-0898 MTD Drive Clutch Cable 39.88")
_WW_2.gif "Part Location Diagram of 946-0898 MTD Drive Clutch Cable 39.88")