Cable Clutch Manual With Spring.

Authentic replacement part used on Husqvarna riding lawn mowers/tractors. This cable consists of a metal wire cable with z-type bent end and rubberized cover/body. The clutch cable engages the deck. You may need pliers to complete this repair. • First you want to see where the old cable is attached • Just remove the cable end there and install the new one • Now you can run the new cable up to the control handle • Then just as the old cable, put the z-shaped end through the hole in the control handle • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable