Watch the install video
783534-1-M-GE-WB17T10006 -Surface Burner Terminal Block Kit
Part Location Diagram of WB17T10006 GE Surface Burner Terminal Block Kit
See part 961 in the diagram
Replacing your General Electric Range Surface Burner Terminal Block Kit
783534-1-S-GE-WB17T10006 -Surface Burner Terminal Block Kit 360 view
( Grid squares measure 1x1 inch )
783534-1-S-GE-WB17T10006 -Surface Burner Terminal Block Kit 783534-2-S-GE-WB17T10006 -Surface Burner Terminal Block Kit 783534-1-S-GE-WB17T10006 -Surface Burner Terminal Block Kit 360 view
Part Location Diagram of WB17T10006 GE Surface Burner Terminal Block Kit Replacing your General Electric Range Surface Burner Terminal Block Kit

Surface Burner Terminal Block Kit

Works With Model 15451-0!

Rated by 9 customers 

?

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$26.12
In Stock
Fix Number:
FIX783534
Manufacturer #:
WB17T10006
Manufactured by:
GE
Works With Model 15451-0!
Product Description
The terminal block is the socket for the coiled burner elements of your cooktop or range in order for the burners to heat up. If your element is not heating up or turning on, there may be an issue with the terminal block. If you remove the coiled element and there are signs of corrosion or arcing on the prongs, the terminal block will need to be replaced. To replace the terminal block, you will need access to the sides and back of the range, so you will need to pull the appliance fully out from the wall. Please be sure to disconnect the power supply to your range before beginning this repair, as you will be cutting, removing, and connecting wiring. This is a genuine OEM replacement kit, and it includes the wires with female contacts, the terminal block, and mounting clip.
Works with the following brands:
General Electric, Kenmore, Hotpoint
Works with the following products
Range
Fixes the following symptoms
Element will not heat, Will Not Start
Part Number Cross Reference
Part# WB17T10006 replaces these:
AP3203326, 1038747, WB17T10006, WB17K10003, WB17T10001, WB17X10007
1 Installation Video Questions and Answers 9 Installation Instructions Model Compatibility
Product Description Part Videos Questions and Answers Installation Instructions Model Compatibility

Product Description

The terminal block is the socket for the coiled burner elements of your cooktop or range in order for the burners to heat up. If your element is not heating up or turning on, there may be an issue with the terminal block. If you remove the coiled element and there are signs of corrosion or arcing on the prongs, the terminal block will need to be replaced. To replace the terminal block, you will need access to the sides and back of the range, so you will need to pull the appliance fully out from the wall. Please be sure to disconnect the power supply to your range before beginning this repair, as you will be cutting, removing, and connecting wiring. This is a genuine OEM replacement kit, and it includes the wires with female contacts, the terminal block, and mounting clip.

  • Works with the following brands:
    General Electric, Kenmore, Hotpoint
  • Works with the following products:
    Range
  • Fixes the following symptoms:
    Element will not heat, Will Not Start
  • Part# WB17T10006 replaces these:
    AP3203326, 1038747, WB17T10006, WB17K10003, WB17T10001, WB17X10007

Videos For installing this part.

Replacing your Surface Burner Terminal Block Kit

Replacing your Surface Burner Terminal Block Kit

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 9 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Charles from Marathon, TX
Parts Used:
WE4M325, WB17T10006
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Cooktop burner receptacle was broken, dryer terminal block was burned.
For the cooktop it was really straightforward. Take the metal screw loose on the receptacle, fish the new wires to the back of the control panel with the old wires, install the new receptacle with a single metal screw, push the wire terminals onto the control, and you're done. The only hard part was putting the new receptacle together. No instructions on how to do it. I tried every way I could imagine. Finally figured out you simply have to push the terminal into the plastic body of the receptacle from the back, VERY firmly. The flat back of the terminal faces the center of the plastic body, while the two curved cylindrical parts face the outside. At some point the whole thing just locks up in there. Be very careful not to break the wire crimp connector off the back of the terminal, it's pretty fragile. You'll have to do some serious looking with a flashlight at the other receptacles to see how the terminals are oriented on the inside of the plastic body. My old one was missing completely, so I had to use one of the others for guidance. A very small screwdriver might help here. I spent a significant amount of time trying to put the stupid thing together. It should come assembled. As for the dryer, it was simply a matter of removing the dryer cord, unscrewing the old terminal block and letting it hang, screwing the new terminal block in place, and transferring the three push-on terminals one at a time to the new block. In my case I had to reterminate the dryer cord wires because one was burned completely loose from the terminal block. Also, if it's a mobile home, the ground strap on this terminal block SHOULD NOT be used. It connects the dryer cabinet to the neutral of the dryer cord, and we don't want to do that. The dryer cord is a four-wire cord and has its own ground conductor.
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patrick from Spring Mills,, PA
Parts Used:
WB30K10018, WB17T10006
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Replaced Burner and Burner Terminal Block
First I unplugged the oven and removed old Burner & Burner Block, Cut wires from the terminal block and taped new wirers to old. Than removed back of oven to access the burner switch I than pulled the old wires & taped new wires through to the back of the oven. I than removed the tape and unplugged the old wires and replaced with the new. Then replaced the back and plugged in the oven and was done.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rajni from Dunedin, FL
Parts Used:
WB17T10006
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
bad contacts
As shown on video. Breeze. Very easy. I did not tape old and new wires together. Installation video was the best. I got the parts very fast.. Will shop this site for future.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sue from Wooster, OH
Parts Used:
WB17T10006
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
burner plug in had melted; poor connection; burner worked intermittently
I removed the top back panel of stove, then removed the old surface burner terminal block and installed the new one. Only tool needed was socket set to remove the top back panel. The terminals on each end of the wire could be installed by hand.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Madeline from Wainwright, AK
Parts Used:
WB17T10009, WB17T10006
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
Right front burner would not heat up. Burner terminal block was burnt and busted in half.
Watched the video before attempting hands on.Replacing the parts was very simple but did not fix the problem.After installing the parts, I took a reading from the ends of the two new leads and nothing. I need to order a new switch as soon as I can get the model number from my neighbor.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robbin from Bow, NH
Parts Used:
WB17T10006
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
a top burner would not work partially on simmer (Outer coil)
I did not realize cable needed to be inserted from the fitting end; should describe same in how to video.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
FRANCIS from MURRELLS INLET, SC
Parts Used:
WB17T10006
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
One Element Would Not Reach Maximum Temperature
Replaced wiring kit to that element with the one purchased. Was able to insert the wires into the left side of the cabinet by pressing the side panel with a screwdriver. This opened a lane for wire insertion. After both ends of wire were properly plugged in I gathered extra wire and wrapped in electrical tape at the rear of the eleme nt cavity.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Mansfield, TX
Parts Used:
WB24X10130, WB17T10006, WB24T10025, WB1X500D
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Burt up reveptiical and blown switch
I just want to say thanks to this site for making access to these parts and self repairs. So easy. This was a great experience so self fulfilling and I saved a ton of money. Thank you .
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
THOMAS from HAGERSTOWN, MD
Parts Used:
WB17T10006
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Surface Burner Worn Out And Burned
Turn off the power. Removed the burned terminal switch and replace it with the new one. Turn power back on and the stove was good to go. All thanks to the speedly way the site got my parts to me. Thanks
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX783534
Manufacturer Part Number: WB17T10006
Brand
Model Number
Description
General Electric
15451-0
Range
General Electric
154510
Range
General Electric
155910
Range
Kenmore
36261101000
Range
Kenmore
36261101001
Range
Kenmore
36261108000
Range
Kenmore
36261108001
Range
Kenmore
36261741000
Range
Kenmore
36261741001
Range
Kenmore
36261742000
Range
Kenmore
36261742001
Range
Kenmore
36261748000
Range
Kenmore
36261748001
Range
Kenmore
36262492000
Range
Kenmore
36262492001
Range
Kenmore
36262780100
Range
Kenmore
36262780101
Range
Kenmore
36262780102
Range
Kenmore
36262780103
Range
Kenmore
36262781000
Range
Kenmore
36262781001
Range
Kenmore
36262781002
Range
Kenmore
36262781003
Range
Kenmore
36262781004
Range
Kenmore
36262788000
Range
Kenmore
36262788001
Range
Kenmore
36262788002
Range
Kenmore
36262788003
Range
Kenmore
36291112000
Range
Kenmore
36291112001
Range