This clutch housing assembly with mode shifter, or washer drive shaft and shifter assembly, is made for your washer. It connects the appliance wash plate to the motor so the washer can shift the drive system between the appliance spin and agitate cycles. Is measures 14.5 inches in diameter. You may need to replace this part if you hear strange noises or if the washer will not spin or agitate.
This clutch housing assembly with mode shifter, or washer drive shaft and shifter assembly, is made for your washer. It connects the appliance wash plate to the motor so the washer can shift the drive system between the appliance spin and agitate cycles. Is measures 14.5 inches in diameter. You may need to replace this part if you hear strange noises or if the washer will not spin or agitate.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
GREGORY
May 15, 2023
Does this part have all 6 stator screws tapped or just 3? Ran into this problem ordering from our local appliance part store with only 3 holes being tapped for the stator screws, would this be a factory defect.? or does the replacement part require only three 10mm screws to support the stator.?
For model number WT5070CW
Hello Gregory, thank you for contacting us. Based on our research, the washer drive shaft and shifter assembly, part number FIX11708484, is compatible with your model, and it has six screws. The compatible part of this model should have six screws. The part you ordered before might not be compatible with your model. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Adam
March 21, 2022
If my basket will not stop spinning after a cycle and will spin freely, separate of the agitator, by hand now will this part fix that? IN theory of course. I still need to tear it apart today to see if this is the bad part.
For model number WT1101CW
Hello Adam, thank you for your question. What does a clutch assembly do on a washing machine?
A clutch assembly is responsible for spinning the basket during the spin cycle. The clutch lining can wear over time. If the clutch lining is worn out, the clutch assembly will not rotate properly to release the brake. So Yes, the part FIX11708484 is the correct part for your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
KP
May 11, 2022
I am wondering if this part (Clutch Assembly) comes with the washer and nut, or if the nut I take off will fit this model no problem? Also, should I need any additional pieces to make this work? Thanks for your time!
For model number WT5101HV
Hello KP. Thank you for writing. The Nut and Washers are not included with the Clutch Housing. The original Nut and Washers can be reused with this Clutch. As long as there are no other damaged parts, the can be reused when installing the Clutch. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX11708484
Manufacturer Part Number: AEN73131406
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
