Halogen Light Bulb - 120V 20W

replaced

Open the lens/bulb cover - one phillips head screw. Turn on safety light so its shining upwards. Remove each bulb - do not pull downwards - slide the bulb out almost horizontally. Since these are halogen bulbs I cleaned them off with rubbibg alcohol. I also cleaned my fingers. Leaning over the stove top (this is a stove top microwave), ge ... Read more ntly replace each bulb. You'll need to feel your way to ensure the two wire connectors slide into their sockets. Once both are done, close the lens/bulb cover and replace the fastener screw.

Open the door, remove the vent diffuser by removing the top two exposed screws. Remove the control panel by removing one screw now exposed from the removed diffuser, pull up on the control board to unseat, then remove the ground screw that keeps it tight to the switches so you can work more easily. The three door switches are easily acces ... Read more sible. Remove the two screws holding the latch bracket, pu the bracket out that's holding all the switches. Remove and replace the switches, then reassemble the microwave in reverse order.