Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Drive Belt - 6 ribs
Works With Model GLTF1240AS0!
$13.31
In Stock
- Fix Number:
- FIX419285
- Manufacturer #:
- 134051000
- Manufactured by:
- Frigidaire
Works With Model GLTF1240AS0!
- Product Description
- This is a drive belt for your washing machine. This part spins the basket in your appliance by connecting the drive motor to the drive system. You will need to replace the drive belt if your pumps are not spinning, your washer is not agitating, or you are noticing excess noise and/or a burning smell. This belt is black with six ribbings. To replace this part, you will need a Phillips screwdriver.
- Works with the following brands:
- Frigidaire, Kenmore, Gibson, Crosley
- Works with the following products
- Washer, Washer Dryer Combo
- Fixes the following symptoms
- Spins slowly, Will not agitate, Burning smell
- Part# 134051000 replaces these:
- AP2108082, 916708, 111700354, 131276300
Part Number Cross Reference
Product Description
This is a drive belt for your washing machine. This part spins the basket in your appliance by connecting the drive motor to the drive system. You will need to replace the drive belt if your pumps are not spinning, your washer is not agitating, or you are noticing excess noise and/or a burning smell. This belt is black with six ribbings. To replace this part, you will need a Phillips screwdriver.
-
Works with the following brands:Frigidaire, Kenmore, Gibson, Crosley
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Spins slowly, Will not agitate, Burning smell
-
Part# 134051000 replaces these:AP2108082, 916708, 111700354, 131276300
Videos For installing this part.
Replacing your Drive Belt - 6 ribs
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Phyllis from Brownville, NY
- Parts Used:
- 134051000
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
belt was worn and stretched
Place belt on the motor first. Then place belt on pulley on the left side and turn pulley clockwise. Hold belt tight and rotate clockwise. Be careful not to pinch your fingers. Before you buy a belt check your tub first. Grab it in the inside of the front of the tub. If it moves more than a little up and down like an inch or two yo
... Read more
ur tub is shot or the bearings are gone. Found that out later. Check tub first than decide what to do.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX419285
Manufacturer Part Number: 134051000
Manufacturer Part Number: 134051000
Brand
Model Number
Description
✖
Mail-In Recycling Rebate