Handle End Cap Kit

1. Used a regular screwdriver to pop out the little button on the front of the end cap.2. Used a Phillips screwdriver to remove the screw holding the broken end cap in place. 3. Used a hammer to tap the bottom of the handle into the end cap. 4. Pushed the handle into the still existing upper end cap. 5. Screwed the new end cap unit into p ... Read more lace. 6. Tapped the new round cover of the end cap in over the screw. That's all it took and about 5 minutes of my time.

Difficulty with the lowest part of the Front Door Handle. I had to file, manipulate with needle nose and regular pliers to make it fit properly. Also had to use razor knife to remove handle coating and file end smoothly to slip into mounting bracket.

Had to trim one handle to same size as old one took old handles & brackets off replaced with new ones

The repair was quick only took a minute. What took time was that I had to spray paint the part. It came in chrome and I had to spray it white.

All I needed was a Phillips screwdriver, patience and that is it!! it was very easy.