This black vent grille mounts on the top of the microwave above the door. Can be used on stainless models.
Works with the following brands:
KitchenAid, Whirlpool, Estate, Roper
Works with the following products:
Microwave
Fixes the following symptoms:
Door not closing properly
Part# 8184608 replaces these:
AP3133625, 920172, 8184608, 8169507, 8184608
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Claudette
October 11, 2021
Will this grill vent fit my model?
For model number KHMS155LSS4
Hello Claudette, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX897438. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
you have to remove two screws on the top of the vent grille remove the broken grille and put the new one with the same two screws that you remove before the vent grille was exactly the same one so fit just right
Somehow the original grill got broken, fell off when I opened door!
This was an over the stove mounted microwave, very closely fit into cabinetry. We put a blanket on stove, 5 gal. plastic bucket upside down on stove, books on bucket. Went into cabinet and removed mounting screws. We lowered front of microwave enough to have room to remove screws, snapped new grill in place,installed screws. Raised front
... Read moreof oven up, reinstalled mounting screws. Removed books, bucket and blanket. Job done!!
Vent grill had broken off of the top of the microwave
Simply remove the screws holding in the top of the old vent grille, tilt the grill towards you and remove the grille by pulling the bottom tabs out/down toward you. To reinstall, put the bottom tabs in first and rotate the top into place. Replace the screws in the top of the microwave that hold the grille in place. Finish with a beer a
... Read morend gloating with your significant other on how you just saved a bunch of money by replacing the broken part instead of replacing the entire unit. You may gloat for a few days after as well.
Replaced the charcoal and grease filters and the fan vent grille
The old vent grille was already off so it was easy to place the new grille in place and tighten the screws. The only hard part about the filters was using the screwdriver to pry them a little in order to grab them to take out.
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
