Outer Door Frame - White

Removed all screws around the edge of door frame making sure the glass did not fall out as the parts of the frame came off. Took off the handle by removing two screws on the inside of the door frame. Cleaned glass and handle. Carefully put the glass in the new frame (hardest part of the process). The mfg. put small amounts of silicone ... Read more glue on spots around the glass apparently so it would not vibrate and make a noise when running. I also did that. Put the inside frame in the same hooks as the glass, making sure it was turned the right way. Attached the handle and put the outer panel back on the main part of the door. Put the screws back in the edges and all was well. I did not allow the door to be closed at any point until all was in place and secure.

I took the screws off the side of the door first and then the ones on the bottom of the door. Next I carefully took off the front part of the door. If you turn it over you will see the 2 screws that go to the handle. You need to take those off.Then there is a plastic piece and then the glass.I went on u tube and they have plenty of do it ... Read more yourself videos if you need a visual. But it was pretty easy and if a 65 yr old women can do it, that's got to tell you something, " )

Removed screws along bottom and inside latch side of door. Slightly pry latch side of door trim and separate trim from door. Hinge side last. Remove handle from old trim. Reverse steps to new trim