Refrigerator Front Roller Kit

I tilted the frig & put 2x4 blocks under frig on all 4 sides elevating it about 4" off floor. I then laid down with my socket set & removed the old broken rollers with a 10 mm socket, the new rollers fit like a glove in the bracket where the old rollers had been. After tightening the rollers in place I again tilted the frig & removed t ... Read more he blocks thus lowering it to the floor. Then using a 13 mm socket I leveled the unit using the adjustment screws. The hardest part of the whole process was getting back up off the floor! Total time start to finish was less than 10 minutes.