Part Location Diagram of 4933DD3001B LG Hinge Cable
See part F013 in the diagram
( Grid squares measure 1x1 inch )

Hinge Cable

Works With Model LDF6920ST!
★★★★★
★★★★★
2 Reviews

Rated by 7 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$17.90
In Stock
Fix Number:
FIX3524406
Manufacturer #:
4933DD3001B
Manufactured by:
LG
Works With Model LDF6920ST!

Product Description

If the door to your dishwasher drops suddenly when opening, there may be an issue with your connector assembly. It works by connecting the door hinge to the door spring, which applies tension and prevents the door from dropping quickly. To replace this part, you will need to pull the dishwasher out from under the cabinet in order to access the spring. This part is sold individually, but you may want to consider replacing both the right and left-hand side connector assemblies, as they can wear at similar rates. This genuine OEM part has a black plastic portion on each end of a white rope that measures approximately 12-inches in length.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Van
February 3, 2022
can u send to malaysia
For model number https://www.fix.com/parts/dishwasher/lg/fix3524406/connector-assembly-4933dd3001b/
Fix.com logo
Hello Van, Thank you for contacting us. Very sorry, we do not ship outside the US, however if know someone in the US that we can ship the part to, you may arrange with them to forward the part to you. We hope this helps!

Was this helpful?
Thank you for voting!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.6 / 5.0, 7 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Ron from Columbia, IL
Parts Used:
4970ED4004G, 4933DD3001B
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Door had very little tension...pretty much dropped to floor if you didn't hold it
Checked to make sure drain hose had room on length to pull unit forward (it did)
Unscrewed 2 small screws at top holding it to counter top.
Removed lower kickplate panel and insulation.
Slid unit forward only about a foot or less...just till you can see springs. (there are no side panels on your dishwasher)
Saw one cab le was totally snapped, other was weak and frayed.
Took picture of assembly first...then just removed spring and cable from pulley and door latch and reattached new parts in about 30 seconds. (Nothing to it!)
Did both sides. You'd be crazy to mess with the job for only one side, etc.
Note: Always do both spring and cable sets at same time. Springs may "look" fine...but after several years you can feel the difference in tightness when you pull to connect the cable to it. Took apart the old set by hand, but needed pliers to pull the spring enough to attach the new cable.
Tested it before putting it all back up under the counter.
I swear it is BETTER than new. All for about $40!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard J from Los Osos, CA
Parts Used:
4970ED4004G, 4933DD3001B
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Door spring not working, door dropped down too fast and was way too heavy to lift easily.
Found a diagram of the door hardware and determined it had to either be a broken door spring or a door spring connector. It was the door spring connector.its the piece that goes from the door spring around the pulley to the connector mounting on the bottom of the door.to get at it you have to1. Take the two Phillip's head screws out of th e washer about 2/3. The way up the frame that help hold the water in place.they are inside and very close to the front when the door is opened. Step 2. Pull the washer out of its enclosed area of the kitchen cabinet about 8 inches. That will expose the door springs, the door spring connectors on both sides of the door and the pullies that the connector are supposed to wrap around. The connectors are nylon line with plastic fittings on each end. These are what usually break (as in my case). I replaced both because one was broken and one was worn. Both the springs were fine.i replaced the connectors, pushed the washer back in to its original position, replaced the two side mounting screws. Job done, no problems, door now works fine. Total labor time, about 30 minutes. Only tools required are 1 screw driver and a pair of pliers to pull the spring down when attaching the new connectors.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Emilio from FRANKLIN SQ, NY
Parts Used:
4970ED4004G, 4933DD3001B
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
One day the door spring snapped on one side of the dishwasher
Followed the video instructions
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sonny from Lebanon, IN
Parts Used:
4933DD3001B
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Connector Assembly Rope Broke
Pulled the Dishwasher ot of the hole it was in ans unscrewd the Four Hex Head screws that heald the sides to the dishwasher. Pulled open the sides and replaced the connectors. One side was broke but replaced both sides to be on the safe side.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
dwight from grimes, IA
Parts Used:
4933DD3001B
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Dishwasher door falls down too hard when opened.
Removed the left and right side panels of the dishwasher (removed screws in each panel) then removed the old connector assemblies from the right and left side. The connector assembly end on right and left respectively hooked into the front door hinge on one end. The other end of the connector assembly was connected to the spring on the right and left sides, followed by pulling the oppositie end of the spring up to a specific hooking location on the right and left sides of the dishwasher.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Olan from Gilbert, AZ
Parts Used:
4970ED4004D, 4933DD3001B
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
Dishwasher Door Broken - Won't Stay Open
1. Disconnect power under sink. 2. Turn off water supply to dishwasher. 3. Disconnect water line. 4. Disconnect drain line from garbage disposal. 5. Pull out dishwasher from counter. 6. Remove right side panel - 2 front screws & 3 rear screws. Pull panel up and off (repeat for left side panel). 7. Remove spring and connector assembly. 8. Hook spring assembly on top hook. 8. Connect the connector assembly to the door hook and route the cord around the roller. 9. Pull the spring down and connect to the end of the connector assembly. (Repeat for other door.). 10. Replace side panels. 11. Move dishwasher back in place in the counter. 12. Reconnect the water and drain lines. 13. Reconnect power. 14. Turn water supply on and check for leaks. 14. Test unit by running rinse cycle.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from Pennington, NJ
Parts Used:
4933DD3001B
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
Dishwasher Door Quickly Drops Open! Previously, door had slowly opened and lowered without a bang
Overview; Needed to pull dishwasher fully out from under counter to get access to both sides, back and front of unit.

Steps:
1) Needed to disconnect power supply > at main breaker panel, I turned off the main breaker for the dishwasher > i then removed the kickplate from the base of the unit, then removed the connector pan el (right hand side) and then loosened the cable connector (two screws holding the cable clamp). I then removed the three wire nuts (hot, neutral and ground) and finally, pulled the mains cable from the connector housing.
2) Needed to disconnect the water supply line > turned off the water supply connection under the kitchen sink. Using a 1/2 " wrench, i needed to loosen the water line and drained the water into a couple of paper towels.
3) Open the door of the unit and remove the two screws fixing the retainers to the underside of the kitchen counter.
4) Pull the unit from under the kitchen counter > Make sure you have room to open and close the dishwasher door!
5) Remove both side panels from the unit > there are three screws on the rear lip (where side panel is secured to the main unit) and two screws on the front side, right where the door closes against the unit.
6) Look down towards where the door hinge joins to the main unit (left side hinge is on the bottom right corner, right side hinge is on the bottom left corner.
7) The connector assembly is pretty much a piece of rope that holds the door to the main unit > look for a broken piece of rope!
8) With the door CLOSED, replace the old connector on one side of the unit (doesn't matter which, left or right side) > the dishwasher side is connected to a big spring, the rope then passes around/under a pulley/bearing to the connector on the door the door side is connected to a hook on the door.
9) Repeat step 8 on the opposite side of the unit.
10) BEFORE you replace the sides of the unit, try opening and closing the door a few times to make sure you have the pieces in the correct location!
11) Reattach the sides of the dishwasher.
12) Get the long piece of string and tie it around the power cable for the unit... My dishwasher has a power cable that will get stuck and caught under the dishwasher when i push it back under the counter!
13) Pull the string out from the front of the unit and push the dishwasher back in place.
14) Reconnect the water line
15) Reconnect the power line
16) Screw in the retainers under the counter
17) Reattach the kick plate
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (2 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX3524406
Manufacturer Part Number: 4933DD3001B
Brand
Model Number
Description
LG
14693
Dishwasher - LG Dishwasher Model 14693 Parts
LG
39232533
Dishwasher - Dishwasher
LG
D1401TB
Dishwasher - LG Dishwasher Model D1401TB Parts
LG
D1401TB1
Dishwasher - LG Dishwasher Model D1401TB1 Parts
LG
D1412TB
Dishwasher - LG Dishwasher Model D1412TB Parts
LG
D1414TB
Dishwasher - LG Dishwasher Model D1414TB Parts
LG
D1425TB
Dishwasher - LG Dishwasher Model D1425TB Parts
LG
D1426DB1
Dishwasher - LG Dishwasher Model D1426DB1 Parts
LG
D1426TB
Dishwasher - LG Dishwasher Model D1426TB Parts
LG
D1426TB1
Dishwasher - LG Dishwasher Model D1426TB1 Parts
LG
D1435BB
Dishwasher - LG Dishwasher Model D1435BB Parts
LG
D1435TB
Dishwasher - LG Dishwasher Model D1435TB Parts
LG
D1435WB
Dishwasher - LG Dishwasher Model D1435WB Parts
LG
D1436TB
Dishwasher - LG Dishwasher Model D1436TB Parts
LG
D1438DB
Dishwasher - LG Dishwasher Model D1438DB Parts
LG
D1438TB
Dishwasher - LG Dishwasher Model D1438TB Parts
LG
D1454CFN
Dishwasher - LG Dishwasher Model D1454CFN Parts
LG
D1470BB
Dishwasher - LG Dishwasher Model D1470BB Parts
LG
D1470TB
Dishwasher - LG Dishwasher Model D1470TB Parts
LG
D1470TBR
Dishwasher - LG Dishwasher Model D1470TBR Parts
LG
D1470WB
Dishwasher - LG Dishwasher Model D1470WB Parts
LG
D1471BB
Dishwasher - LG Dishwasher Model D1471BB Parts
LG
D1471BB1
Dishwasher - LG Dishwasher Model D1471BB1 Parts
LG
D1471DB1
Dishwasher - LG Dishwasher Model D1471DB1 Parts
LG
D1471TB
Dishwasher - LG Dishwasher Model D1471TB Parts
LG
D1471TB1
Dishwasher - LG Dishwasher Model D1471TB1 Parts
LG
D1471TBK
Dishwasher - LG Dishwasher Model D1471TBK Parts
LG
D1471WB
Dishwasher - LG Dishwasher Model D1471WB Parts
LG
D1471WB1
Dishwasher - LG Dishwasher Model D1471WB1 Parts
LG
D1472TB
Dishwasher - LG Dishwasher Model D1472TB Parts