Part Location Diagram of W10342596 Whirlpool Off-Switch Actuator Kit
See part 2 in the diagram
( Grid squares measure 1x1 inch )

Off-Switch Actuator Kit

Works With Model TC607S0!
★★★★★
★★★★★
1 Review

Rated by 3 customers 

?

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$99.27
In Stock
Fix Number:
FIX3489806
Manufacturer #:
W10342596
Manufactured by:
Whirlpool
Works With Model TC607S0!

Product Description

This kit contains the normally closed switch, toe guard, template, 2 screws and actuator. NOTE: This part has been redesigned by the manufacturer but will still function the same as the original part.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Thomas from Oak Forest, IL
Parts Used:
W10342596
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Replace On-Off Acutuator
The switch was completely redesigned (much better design) and required some extra work rather then a straight replacement. The instructions were very clear with easy to follow diagrams. The only tricky part was drilling the 2 new holes to mount the actuator. Although a template was provided, make sure the holes are level or the actuato r will not line up with the switch. I enlarged the holes on the bracket to give me a little more room to line it up. Drive the screws thru the new holes before mounting the bracket to thread them. The rest is simple.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Surprise, AZ
Parts Used:
W10342596
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Foot switch broke off.
My unit is built-in with a matching cabinet front. I removed the interior box unit and took it outside for a good cleaning. I then removed the sweep and old foot switch. Four screws total. I also removed the original On switch screws that held the broker actuator. Once cleaned and items removed I then removed the base from under the c ounter and took off the 8 screws holding the front. The original On switch was not the easiest thing to get out since the plastic had hardened with age and the pressure releases didn't want to cooperate. I removed the two connectors from the switch and.. So I basically took and pair of pliers and twisted it until it broke. BTW I did unplug the unit prior to this operation. I installed the new Off-switch then used the template provided to drill two holes for the actuator foot switch. Once done I reconnected the two leads for the switch replaced the 8 screws for the front, (I also cleaned and bleached the interior of the unit. found a few interesting tidbits in there). Slid the interior unit back in and it all works very well.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dave from Santa Rosa, CA
Parts Used:
W10342596
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Original actuator assembly broken
Pulled the appliance out from under the counter and followed the written instructions which came with the part. They were complete and easy to follow. I particularly liked the paper template which made locating and drilling holes to mount the new actuator assembly very easy. There were no surprises and the new actuator design is a big improvement over the original.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX3489806
Manufacturer Part Number: W10342596
Brand
Model Number
Description
Kenmore
66513633100
Trash Compactor - Kenmore Trash Compactor Model 665.13633100 (66513633100, 665 13633100) Parts
KitchenAid
KUCC151LPA0
Trash Compactor
KitchenAid
KUCC151LPA1
Trash Compactor
KitchenAid
KUCC151LPA2
Trash Compactor
KitchenAid
KUCC151LSS0
Trash Compactor
KitchenAid
KUCC151LSS1
Trash Compactor
KitchenAid
KUCC151LSS2
Trash Compactor
KitchenAid
KUCS02FRPA0
Trash Compactor
KitchenAid
KUCS02FRPA1
Trash Compactor
KitchenAid
KUCS02FRSS0
Trash Compactor
KitchenAid
KUCS02FRSS1
Trash Compactor
KitchenAid
KUCS03FSSS0
Trash Compactor
KitchenAid
KUCS03FTPA0
Trash Compactor
KitchenAid
KUCS03FTSS0
Trash Compactor
KitchenAid
KUCV02FRMT0
Trash Compactor
KitchenAid
KUCV02FRMT1
Trash Compactor
KitchenAid
KUCV02FRSS0
Trash Compactor
KitchenAid
KUCV02FRSS1
Trash Compactor
KitchenAid
KUCV151MMT0
Trash Compactor
KitchenAid
KUCV151MMT1
Trash Compactor
KitchenAid
KUCV151MSS0
Trash Compactor
KitchenAid
KUCV151MSS1
Trash Compactor
Jenn-Air
TC607S0
Trash Compactor
Jenn-Air
TC607X0
Trash Compactor
Jenn-Air
TC707S0
Trash Compactor - TRASH COMPACTOR