340571-1-M-Whirlpool-330031 -Surface Burner Plug-In Block Kit
Part Location Diagram of 330031 Whirlpool Surface Burner Plug-In Block Kit
See part 41 in the diagram
340571-1-S-Whirlpool-330031 -Surface Burner Plug-In Block Kit 360 view
( Grid squares measure 1x1 inch )
340571-1-S-Whirlpool-330031 -Surface Burner Plug-In Block Kit 340571-2-S-Whirlpool-330031 -Surface Burner Plug-In Block Kit 340571-1-S-Whirlpool-330031 -Surface Burner Plug-In Block Kit 360 view
Part Location Diagram of 330031 Whirlpool Surface Burner Plug-In Block Kit

Surface Burner Plug-In Block Kit

Works With Model EPD9-79A439A!
★★★★★
★★★★★
4 Reviews

Rated by 10 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$13.42
In Stock
Fix Number:
FIX340571
Manufacturer #:
330031
Manufactured by:
Whirlpool
Works With Model EPD9-79A439A!
Product Description
This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.
Works with the following brands:
Whirlpool, Amana, Roper, Caloric
Works with the following products
Range, Cooktop, Microwave Oven Combo
Fixes the following symptoms
Element will not heat
Part Number Cross Reference
Part# 330031 replaces these:
AP3075808, 3374, 330031, 0009336, 0042147, 0042153, 0045536, 0045546, 0051088, 0054794, 0067069, 0071930, 0071931, 0075054, 0086726, 0088866, 0089227, 0089291, 0089336, 0090094 , 0300678, 0308306, 0308408, 0C00101999, 12001673, 14200040, 14200233, 14203070, 14205001, 14205727, 14209631, 14210007, 14210242, 14254131, 1430-292, 1430292, 258858, 258864, 293798, 304645, 312605, 3147829, 3169190, 3176638, 318960, 330031, 330031A, 343824, 4164317, 4165235, 4165241, 4179038, 42147, 4315237, 4320363, 4320364, 4320365, 4320366, 4320367, 4320781, 4321228, 4332751, 4332999, 4335063, 4335480, 4338440, 4338510, 4342636, 4343198, 4343235, 4355480, 4362508, 4362529, 4363088, 4364178, 4371379, 4371919, 4372889, 4378608, 4389596, 5-50226, 5303935058, 550226, 560467, 7-66339, 7112P059-60, 71930, 74-06-132, 7401P014-60, 766339, 786212, 816185, 865699, 865700, 865701, 865702, 865703, 865719, 865741, 865749, 866080, 866083, 866144, 866227, 868000, 868464, 868599, 877578, 877579, 877610, 877618, 877632, 877796, 877977, 878407, 89336, 96610P01, 96852P01, 99989649, 9E28000199, B5015402, C2711501, C2716501, C2735201, FSP330031, GE WB17X210, M300, M5D117, M5D71, R0157519, R0157526, R0157932, R0167091, R0167117, R0181149, R1575-19, R1670-91, W10116799, W10116803, W10841094, WB17X210, WCI5303935058, Y0042147, Y0042153, Y0045536, Y0045546, Y0051088, Y0054794, Y0067069, Y0071930, Y0071931, Y0075054, Y0086726, Y0088866, Y0089227, Y0089291, Y0089336, Y0090094, Y0300678, Y0308306, Y89336, YC2711501, YC2716501, YR0181149
1 Related Part Questions and Answers 10 Installation Instructions ★ 4 Customer Reviews Model Compatibility
Product Description Questions and Answers Related Parts Installation Instructions Customer Reviews Model Compatibility

Product Description

This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.

  • Works with the following brands:
    Whirlpool, Amana, Roper, Caloric
  • Works with the following products:
    Range, Cooktop, Microwave Oven Combo
  • Fixes the following symptoms:
    Element will not heat
  • Part# 330031 replaces these:
    AP3075808, 3374, 330031, 0009336, 0042147, 0042153 , 0045536, 0045546, 0051088, 0054794, 0067069, 0071930, 0071931, 0075054, 0086726, 0088866, 0089227, 0089291, 0089336, 0090094, 0300678, 0308306, 0308408, 0C00101999, 12001673, 14200040, 14200233, 14203070, 14205001, 14205727, 14209631, 14210007, 14210242, 14254131, 1430-292, 1430292, 258858, 258864, 293798, 304645, 312605, 3147829, 3169190, 3176638, 318960, 330031, 330031A, 343824, 4164317, 4165235, 4165241, 4179038, 42147, 4315237, 4320363, 4320364, 4320365, 4320366, 4320367, 4320781, 4321228, 4332751, 4332999, 4335063, 4335480, 4338440, 4338510, 4342636, 4343198, 4343235, 4355480, 4362508, 4362529, 4363088, 4364178, 4371379, 4371919, 4372889, 4378608, 4389596, 5-50226, 5303935058, 550226, 560467, 7-66339, 7112P059-60, 71930, 74-06-132, 7401P014-60, 766339, 786212, 816185, 865699, 865700, 865701, 865702, 865703, 865719, 865741, 865749, 866080, 866083, 866144, 866227, 868000, 868464, 868599, 877578, 877579, 877610, 877618, 877632, 877796, 877977, 878407, 89336, 96610P01, 96852P01, 99989649, 9E28000199, B5015402, C2711501, C2716501, C2735201, FSP330031, GE WB17X210, M300, M5D117, M5D71, R0157519, R0157526, R0157932, R0167091, R0167117, R0181149, R1575-19, R1670-91, W10116799, W10116803, W10841094, WB17X210, WCI5303935058, Y0042147, Y0042153, Y0045536, Y0045546, Y0051088, Y0054794, Y0067069, Y0071930, Y0071931, Y0075054, Y0086726, Y0088866, Y0089227, Y0089291, Y0089336, Y0090094, Y0300678, Y0308306, Y89336, YC2711501, YC2716501, YR0181149 Show less

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Surface Burner - 8 Inch - 2600W
$36.93
In Stock
Part Number: FIX11743367
NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.3 / 5.0, 10 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Doris from Skoke, IL
Parts Used:
330031
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Elements heat sporatically
I followed the steps in the instructions which were very easy, once the electric power was turned off to the range. I replaced 2 burner plug in blocks in less than 30 minutes. I am embarrassed to say that these burners have not been functional for almost 3 years. I thought that I could not work with electric. Just make sure you have t he tools on hand and read the instructions first. I am a mid-50's female, if I can do this so can anyone else!
Read less
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeanette from Brush, CO
Parts Used:
330031
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The wires were burnt coming out of the Plug in Block
Per the instructions. I soldered my wires where I made the splice vs using the twist on wire connectors. Just feel better about them not coming apart.....other than that, it was easy peasy!
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Geraldine from Dolgeville, NY
Parts Used:
330031
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Burner won't heat up
installation was simple just by following directions on package. Parts from this kit fit perfectly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brian from Cincinnati, OH
Parts Used:
WPY04100166, W11121640, 330031
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Bad plug in socket. I purchased a new heating element and infinite control switch but will use as a backup as it was not necessary.
Turned off power at the curcuit breaker. Verified power off. Lifted cooktop out of countertop opening. Removed 10 screws holding the cooktop to the pan. Disconnected the wire at the infinite control switch. Remove small phillips screw holding the surface plug in block to the burner opening. Spliced the connectors to the new plug in block. Twisted the wires together and applied wire nut included in the kit. Placed shrink wrap sleeve over wire nut and heated with hair dryer to shrink the sleeve. Reversed the disassembly . Turn power back on and tested good.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edward from Chicopee, MA
Parts Used:
330031
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
loose surface burner connections
Cut wires to connector blocks, remove old plug block with Phillips screwdriver, assemble new block with correct bracket and screw bracket to stove top, strip ends of cut wires to same length as stripped wire of new block, slide shrink tube over wires, wire nut wires together. slide shrink tube over wire and heat with a lighter till shrunk over wire nut. Done.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Louis from Saint Maries, ID
Parts Used:
330031
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Wires burnt and broken between connector.
Replaced both connections and wires from new Surface Burner Plug-In Block Kit. Took me a little while, have never done this before. Instructions were good, items perfect fit! Would order from again!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dana from Pembroke, MA
Parts Used:
330031
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Right front burner didn't work. I could either have High or off. Anything in between was off.
This was the second time I replaced the plug-in block. Turned off the circuit breaker. Took out the burner and pan. Opened the top of the range, disconnected the wire nuts. Unscrewed the block unit at the edge of the burner opening. The new block kit did not have the terminals assembled, so I looked to see how the old one looked and inser ted the terminals into the back of the block until they snapped in. Put the heat-shrink sleeves on the terminal wires, then connected the wires from the range to the terminals with wire nuts. Pulled the sleeves over the wire nuts and heated with a lighter until they shrunk. Did not shrink as well as last time, but it looked to be good enough. Reattached the block onto the stove top, put in the pan and inserted the terminals from the burner into the block. Turned the electricity back on, and it works.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Keith from Mukwonago, WI
Parts Used:
330031
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Burner would not heat
Followed detailed instructions; removed "heating block" (one phillips screw), cut wires leading to "heat block" (took longer to strip 3/8" wire than to complete rest of project), connected wires in kit with provided wire nuts, assembled wires to "new heat block", installed with one phillips screw and done. Made me ashamed that it took 3 months to get around to doing a 20 minute project.
Read less
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kim from Matthews, NC
Parts Used:
W10196406RW, W10196405RW, 330031
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Coils were uneven drip pans were corroded
This is a drop in stove. Turned off power at breaker. Pulled the coils and drip pans to access screws holding the top on. Lifted top and unscrewed old block kit. Replaced block kit and secured it. Screwed down the top and installed new drip pans. Reinserted coils and reset power. All good.
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
SUSAN from BELLEVILLE, NJ
Parts Used:
330031
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
switch and element block
Took back panel off just a few screws removed old switch replaced with new one replaced back. Lift stove top removed old block put new wire twist wire nut enclosed in package done works??
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
★ Customer Reviews
Average Rating: (4 Reviews)
4.3
★★★★★
★★★★★
Filter By Rating:
  • 5★
    1
  • 4★
    3
  • 3★
    0
  • 2★
    0
  • 1★
    0
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jean O - November 5, 2021
Verified Purchase
Harvest Gold!
Just can't let go of my 70's Whirlpool harvest gold range!...I've replaced the burner wires before....the new part was good except the short wire caps didn't catch the connected wires very well. I had to secure with electrical tape before shrink wrap the sleeves. I also had a rough time getting the small screw out of the bracket!
★★★★★
★★★★★
Barbara B - May 26, 2021
Verified Purchase
Not an exact match, but worked fine
The terminals looked like an exact match to what we already had, so I was planning to just replace them. When we received the kit, they looked different in person, so we ended up just replacing the whole assembly. In spite of missing one of the wire nuts (the bag was partially-open), we grabbed a wire nut from spares and the repair went without any other issues. Now we can search for a replacement cook top on our own time and find something perfect for us.
★★★★★
★★★★★
Paul B - May 25, 2021
Verified Purchase
It worked /
Simple guy 101 throw the breaker splice the part in . Throw the breaker back on .
★★★★★
★★★★★
G Dale G - May 10, 2020
Verified Purchase
part was O(K
Original Burner plug in block was bad--broken contact. New one was easy to install. BUT burner still didn't work although it worked in other blocks in the stove. The inability to get ANY technical assistance is beyond frustrating . But these are not normal times Perhaps if they were I would have been able to get the TA I needed to make the stove functional So I now have a three burner stove with a new plug in bock that didn't solve the problem

Model Compatibility

This part works with the following models:
Fix Number: FIX340571
Manufacturer Part Number: 330031
Brand
Model Number
Description
Kenmore
101936630
Range - Kenmore Range/Stove/Oven Model 101.936630 (101936630, 101 936630) Parts
Kenmore
101936634
Range - Kenmore Range/Stove/Oven Model 101.936634 (101936634, 101 936634) Parts
Kenmore
101938630
Range - Kenmore Range/Stove/Oven Model 101.938630 (101938630, 101 938630) Parts
Kenmore
101938635
Range - Kenmore Range/Stove/Oven Model 101.938635 (101938635, 101 938635) Parts
Admiral
1058AH-W
Range - Electric
Admiral
1058AH-Z
Range - Electric
Admiral
1058WH-W
Range - Electric
Admiral
1068F-CZ
Range - Slide-in, Electric
Hoover
1151AJ-30
Cooktop
Admiral
1151AL-30
Cooktop
Hoover
1151WJ-30
Cooktop
Admiral
1151WL-30
Cooktop
Roper
1346*0A
Range - GAS RANGE
Whirlpool
1346^0A
Range
Roper
1346W0A
Range - Freestanding, Gas
Roper
1347*0A
Range - GAS RANGE
Whirlpool
1347^0A
Range
Roper
1347W0A
Range - Freestanding, Gas
Roper
1355*0A
Range - GAS RANGE
Roper
1355*1A
Range - GAS RANGE
Roper
1355*2A
Range - GAS RANGE
Roper
1355*3A
Range - Range (gas)*
Whirlpool
1355^0A
Range
Whirlpool
1355^1A
Range
Whirlpool
1355^2A
Range
Whirlpool
1355^3A
Range
Roper
1355W0A
Range - Freestanding, Gas
Roper
1355W1A
Range - Freestanding, Gas
Roper
1355W2A
Range - Freestanding, Gas
Roper
1355W3A
Range - Gas