Part Location Diagram of WH41X365 GE Water Pressure Switch Hose
See part 811 in the diagram
Replacing your General Electric Washer Water Pressure Switch Hose
( Grid squares measure 1x1 inch )

Water Pressure Switch Hose

Rated by 4 customers 

?

Really Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$13.08
In Stock
Fix Number:
FIX272183
Manufacturer #:
WH41X365
Manufactured by:
GE

Product Description

This is a water pressure switch hose, also known as the air dome tube, for your washer. It is made of clear plastic and is sold individually. The hose transports water to your water pressure switch, so the switch can control how much water enters the washer during a cycle. If your washer will not fill up with water, or if water continues to fill the tub even after it is full, you may have a damaged water pressure switch hose. Inspect the hose for cracks and leaks, and if the hose is damaged you will need to replace it.

Videos For installing this part.

Replacing your Water Pressure Switch Hose

Replacing your Water Pressure Switch Hose

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sandra
January 23, 2023
Will this part help with my washer filling up with water.The wash cycle is ok, but when comes to rinse cycle tub doesn't fill with enough water.
For model number GTWN2800D1WW
Fix.com logo
Hi Sandra, thank you for reaching out. We suggest that you check the water inlet valve, pressure switch hose, lid switch, and rotary temperature switch, as these could be the culprits. If you require assistance to place an order, please contact customer service. We hope that helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.2 / 5.0, 4 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Argentric from KANSAS CITY, KS
Parts Used:
WH41X365, WH12X10093
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Washer water sensor level never forced a shutoff of running water
Repaired by watching the videos and reviewing the step by steps instructions provided by this site, Excellent. Since I also subscribe to the lazy man theory I added one extra step. I used a wire Butt Connector that was a tight fit. connected one end of the butt connect (make sure it is tight enough to withstand fiction) to one end of t he new Switch hose and the other end to the Switch hose I was replacing. This allowed me to gently and easily pull the old tube out and it pulled the new tube through the tubes path.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jenny from Mount Plymouth, FL
Parts Used:
WH41X365
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Washer would not stop filling with water
The tools I used were a cordless drill, a torx bit, needle nosed pliers and a metal putty knife. I unplugged the washer, turned off the water and removed the hot and cold water inlet lines. I removed the four torx-head screws on top of the washer, leaned the panel forward and removed the old water pressure switch hose from the water pre ssure switch with needle nosed pliers. Then I went to the front of the washer and used a metal putty knife to open the front panel. There are two clips holding the front panel on. You can't see them but if you wedge the putty knife in the space between the top of the washer and the top of the front panel, you will feel the clips about 3 inches in on each side. Just press the putty knife in that space where the clips are and that will cause the clips to release. Once you have the front panel off, you will see a little box attached to the tub where the other end of the water pressure switch hose is attached. Before totally removing the old hose, I cut a 5 inch piece of the old hose and blew into it (while attached to that box) just to make sure the box wasn't clogged as well. I then removed that small hose and attached the new pressure switch hose to the box and up through the washer back to the pressure switch. Then I put everything back together and ran the washer through a cycle to make sure it worked. The washer worked like a charm and it felt great knowing I didn't have to spend a boatload of money on a new washer!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Port Clinton, OH
Parts Used:
WH13X10024, WH41X365, WH12X10065
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Washer Overflowed intermittently
As described in the video's so thoughtfully provided by this site. Parts showed up within two days and appeared to be OEM. Well done . You've earned my future business and referrals.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Carteret, NJ
Parts Used:
WH13X10037, WH41X365
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Would not stop filling.
Found triple water valve leaking under solenoid. Assumed defective & replaced along with pressure switch hose. No help. Replaced pressure switch. Solved.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX272183
Manufacturer Part Number: WH41X365
Brand
Model Number
Description
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
52120TAWB
Washer
General Electric
56021A0WW
Washer
General Electric
56031A0WW
Washer
General Electric
56041A0WW
Washer
General Electric
56051A0WW
Washer
General Electric
56121T2WW
Washer
General Electric
56121T3WW
Washer
General Electric
56121T4WW
Washer
General Electric
56121T5WW
Washer
General Electric
56121T8WW
Washer
General Electric
56121TAWW
Washer
General Electric
56121TBWW
Washer
General Electric
56200T2WB
Washer
General Electric
56200T3WB
Washer
General Electric
56200T5WB
Washer
General Electric
56220T6WW
Washer
General Electric
56220T8WW
Washer
General Electric
56220TAWW
Washer
General Electric
56220TBWW
Washer
General Electric
56221B0WW
Washer
General Electric
56221B1WW
Washer
General Electric
56221B2WW
Washer
General Electric
56221B3WW
Washer
General Electric
56221T6WW
Washer
General Electric
56231B0WW
Washer
General Electric
56231B1WW
Washer
General Electric
56231B2WW
Washer
General Electric
56231B3WW
Washer