Dual Element with Limiter

This was a replacement for 316555800. There is a good video on YouTube to replace this. First thing is to unplug or open circuit breaker to kill power. You need to open oven door, remove 2 screws from the top. Then you can lift the top up. You will need to prop the top up so you can remove the burner.Then use a nut driver(or socket) to re ... Read more move 2 screws from the cross brace holding the burner on. Take the pliers to pinch the tabs holding the burner to the brace. Notice where the tabs are mounted on the burner and install on the new one in the same position(mine were at 9 and 42). The wiring is slightly different on the replacement burner. With the burner face down, and the electrical connecters on the right, the 2 wires at the top will be in the same position on the new one(just facing a different direction-vertical instead of horizontal). Now on the big block, the wires are numbered-1a,1b,2a,2b. The wires will go on the same numerical lug as on the old one. They DO NOT go in the same POSITION as the old one but the wires will reach. Then you can install everything in the opposite order. There were not any helpful instructions that I could find for the replacement burner, so I thought I would write out what I found. Even called the help line and they couldn't help me with the wiring. Hope this was helpful.