Door Handle

Remove the door from the main body of the oven then proceeded to remove the back of the door using an Allen wrench. Once the two Allen wrenches were removed was able to separate the back of the door from the front half.I then proceeded to remove the screwsthat held on the side channels. I then proceeded to remove the four screws that held ... Read more the door handle on to the mainframe. I then removed the three screws that held the bottom rail onto the glass. This is where I ran into the problem.The bottom rail was so rusted out that it had fused onto the glass on the front of the door. Using a hammer and a very small screwdriver I had to work the bottom rail freefrom the glass. This took quite some time because I was afraid that in the process I might crack the glass. Fortunately it all turned out okay. I then continued to reassemble all pieces received and now my oven door looks like a brand-new door. With one exception. One of the end caps that I received has a slight imperfection. It has a depression in it and is not as smooth as the other one.