Reverse Osmosis System Filter Assembly

This package of two includes one carbon block pre-filter with a gray end cap and one carbon block post filter with a green end cap. The filter with the gray end cap is installed first and should be placed on the water inlet side (from the water supply). The green filter is installed second and should be installed on the water exit side (to your tap/refrigerator). This filter is compatible with brands that can support 10-Inch by 3-Inch filters. This water filter filters down to 0.5 microns and is designed to protect your drinking water from cysts, chlorine odor and flavor, sediment, rust, and VOC's. The first stage removes the larger particles, followed by the second stage where it enters a finer membrane and active charcoal element. It should be replaced every six months or 600 gallons, whichever comes first, and this can vary depending on your local water conditions.