X-Large Burner Head with Electrode

Swapping out a burner is simple, once you remove the 2 screws. I used a Torx T15 screwdriver, available from your hardware store. However…be prepared for a stubborn screw or 2. DO NOT force a screw – you can snap off the head. If it won’t loosen, soak it with WD40 or Liquid Wrench. Don’t hurry, it may take a day or 2. You can also a ... Read more pply heat with a soldering iron for a minute or 2. When it begins to move, work it back & forth, like a loose tooth. Once you get one screw out and the other just won’t come, go ahead and snap it off. One screw, plus the stub of the second will suffice to install the new burner. Don’t be discouraged. This is simply to guide you through the worst-case scenario.

Decided to replace the entire burner element instead of just the ignighter. Glad I did. For what I saved doing the repair myself, it was well worth the extra money to have the ignighter properly installed by the factory!