Watch the install video
2003327-1-M-Whirlpool-12001788-Drive Belt and Motor Isolator Kit
Part Location Diagram of 12001788 Whirlpool Drive Belt and Motor Isolator Kit
See part 5 in the diagram
Replacing your Maytag Washer Drive Belt and Motor Isolator Kit
( Grid squares measure 1x1 inch )
2003327-1-S-Whirlpool-12001788-Drive Belt and Motor Isolator Kit 2003327-2-S-Whirlpool-12001788-Drive Belt and Motor Isolator Kit Part Location Diagram of 12001788 Whirlpool Drive Belt and Motor Isolator Kit Replacing your Maytag Washer Drive Belt and Motor Isolator Kit

Drive Belt and Motor Isolator Kit

Works With Model MAH20PDAWW!

Rated by 7 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$40.58
In Stock
Fix Number:
FIX2003327
Manufacturer #:
12001788
Manufactured by:
Whirlpool
Works With Model MAH20PDAWW!
Product Description
This kit contains a flat drive belt, two motor isolators, and an instructions sheet. The drive belt is made to slip on the pulley until the basket gets up the desired speed.
Works with the following brands:
Maytag, Crosley, Amana
Works with the following products
Washer, Washer Dryer Combo
Fixes the following symptoms
Burning smell, Will not agitate, Spins slowly, Will not drain
Part Number Cross Reference
Part# 12001788 replaces these:
AP4009041, 785411, 12001435, 12001788, 12001788VP, 22002040, 22002313
1 Installation Video 1 Related Part Questions and Answers 7 Installation Instructions Model Compatibility
Product Description Part Videos Questions and Answers Related Parts Installation Instructions Model Compatibility

Product Description

This kit contains a flat drive belt, two motor isolators, and an instructions sheet. The drive belt is made to slip on the pulley until the basket gets up the desired speed.

  • Works with the following brands:
    Maytag, Crosley, Amana
  • Works with the following products:
    Washer, Washer Dryer Combo
  • Fixes the following symptoms:
    Burning smell, Will not agitate, Spins slowly, Will not drain
  • Part# 12001788 replaces these:
    AP4009041, 785411, 12001435, 12001788, 12001788VP, 22002040 , 22002313 Show less

Videos For installing this part.

Replacing your Drive Belt and Motor Isolator Kit

Replacing your Drive Belt and Motor Isolator Kit

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Lip Seal Kit
$143.93
In Stock
Part Number: FIX2003500
This kit comes with grease, earlier lip seal, revised lip seal, o-ring, seal tool, and washer kit. Used primarily on front load washers. NOTE: Bearing is NOT sold separately. It is only available with the outer tub a...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.9 / 5.0, 7 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Timothy from Monroe, GA
Parts Used:
12001788
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Motor ceased working
Parts (motor/motor controller board) arrived within two days of ordering. Instructions were extremely accurate. Machine was up and running within an hour of the start of the repair. Replacement parts were different than original; wiring harness on original was attached to the Motor Controller Board and plugged into the motor; reverse a pplication with new parts. I had difficulty with the plug from the motor to the controller board as there was no specific plug to place it into as the other wires on the unit. This plug seated onto the end of the physical board. For a visually impaired individual; this was the most challenging aspect of the repair.
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bruce from Pasadena, MD
Parts Used:
22004465, 12001788
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Washing Maching Made lots of Squealing during spin Cycle
I had some help. The instructions were pretty clear about diss-assembly. I had to hit the shaft out with a sledge hammer and a block of wood. the confusion came as two sets of bearing seals were provided.I finally figured out that on my unit I had to use the thicker one without the spacer. Putting it back together was laborious as the clips that held the front rubber seal on the tub were very difficult to put on. The belt that I ordered had the same part number as my belt but it was 2 inches too short so I had to use my original belt. It looked in good shape so I am not worried and it is easy to get to if I do have to replace it later on.
Read less
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Keith from Parsons, KS
Parts Used:
12001788
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Washer spin cycle would count down to 4 minutes then went back to 7 minutes with wet clothes
I took the back off, took out the old belt. The bolt holding the drum pulley had worked loose so I tightened it before putting the new belt on. I replaced the motor rocker bushings according to the instructions before mounting the new belt. I ran it around several times by hand to stretch the belt and insure the belt wouldn't slip off bef ore putting the cover on. Then I ran it through spin cycle and quick wash a couple of times to insure everything was ok.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tom from Bradley, ME
Parts Used:
12001788
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Drum drive belt slipping
Removed four screws to remove the rear access panel, then rotated the drum while pulling the belt towards me to remove the belt from the drive motor and drum pulleys. Then reversed the procedure to install the new belt. It actually took longer to unhook/rehook the hoses and pull the machine out/back then it did to change the belt.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James Stanley from Bedford, VA
Parts Used:
12001788
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench set
the new belt was shorter than the old one.
The bushing replacement was to difficult. the belt installation was a bear.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Duane from Sun Prairie, WI
Parts Used:
12001788
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
worn out belt.
watch repair video
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
duane from sun prairie, WI
Parts Used:
12001788
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
worn out belt.
watched repair video
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX2003327
Manufacturer Part Number: 12001788
Brand
Model Number
Description
Crosley
CAH4205AWJ
Washer - Residential
Crosley
CAH4205AWW
Washer - Residential
Maytag
MAH14PDAAL
Washer - Commercial
Maytag
MAH14PDAAQ
Washer
Maytag
MAH14PDAAW
Washer - Commercial
Maytag
MAH14PDABL
Washer - Commercial
Maytag
MAH14PDABW
Washer - Commercial
Maytag
MAH14PDAEW
Washer
Maytag
MAH14PDAGW
Washer
Maytag
MAH14PDBAW
Washer
Maytag
MAH14PDBEW
Washer
Maytag
MAH14PDBGW
Washer
Maytag
MAH14PDCBQ
Washer
Maytag
MAH14PDCBW
Washer
Maytag
MAH14PDDWW
Washer
Maytag
MAH14PDSAW
Washer
Maytag
MAH14PNAEW
Washer
Maytag
MAH14PNAGW
Washer
Maytag
MAH14PNAWW
Washer
Maytag
MAH14PNBAW
Washer
Maytag
MAH14PNBEW
Washer
Maytag
MAH14PNBGW
Washer
Maytag
MAH14PNSAW
Washer
Maytag
MAH14PRAWW
Washer
Maytag
MAH14PSAAW
Washer - Commercial
Maytag
MAH20PDA3W
Washer
Maytag
MAH20PDAWQ
Washer
Maytag
MAH20PDAWW
Washer - Commercial
Maytag
MAH20PDCXQ
Washer
Maytag
MAH20PDCXW
Washer