This part is located on the housing for the heating element.
Works with the following brands:
General Electric
Works with the following products:
Dryer
Part# WE4M398 replaces these:
AP4309184, 1475625, WE4M333
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Guillermo
January 25, 2023
WE4M398-THERMISTOR TEST READING WITH A TESTER
For model number GFDS350
Hi Guillermo,
Thank you for your question. The inlet control thermistor should show continuity. When using a multimeter, you should see a reading of 120k ohms at room temperature and it should not have a closed or open circuit. If it does, it is not working correctly and it will need to be replaced. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to the dryer motor if t...
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 4.4 / 5.0, 1 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Simple to replace . Hardest part is getting belt off drum to remove drum . Once drum is out repair is easy . I also replaced the booster coil and the main coil . Also very easy . Inlet controll thermostat did not solve my problem . It had to be one of the coils . Dryer is fixed
0 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX1766014
Manufacturer Part Number: WE4M398
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
